Calling Up Panel Settings Appropriate For The Current Style (One Touch Setting) - Yamaha Clavinova CVP-609 Owner's Manual

Calling up Panel Settings Appropriate for the
Current Style (One Touch Setting)
One Touch Setting is a powerful and convenient feature that automatically calls up the
most appropriate panel settings (Voices or effects, etc.) for the currently selected Style,
with the touch of a single button. If you've already decided which Style you wish to use,
you can have One Touch Setting automatically select the appropriate Voice for you.
1
Select the desired Style (steps 1– 2 on page 48).
2
Press one of the ONE TOUCH SETTING [1] − [4] buttons.
Not only does this instantly call up all the settings (Voices, effects, etc.) that match
the current Style, it also automatically turns on ACMP and SYNC START, so that
you can immediately start playing the Style.
Confirming the One Touch Setting Contents
In the Style Selection display, touch
shows what Voices are assigned to the ONE TOUCH SETTING [1] – [4] buttons for the
current Style. You can call up the desired settings also by touching one of the One Touch
Settings 1– 4 directly on the Information window.
3
As soon as you play a chord with your left hand, the selected Style
starts.
Each Style has four One Touch Setting setups. Press the other ONE TOUCH
SETTING [1] − [4] buttons to try out other setups.
Automatically Changing One Touch Settings with the Main Sections
The convenient OTS (One Touch Setting) Link function lets you automatically
have One Touch Settings change when you select a different Main section (A −
D). The Main sections A, B, C and D correspond to One Touch Settings 1, 2, 3
and 4 respectively. To use the OTS Link function, turn the [OTS LINK] button
on.
52 CVP-609/605 Owner's Manual
(Information) to call up the Information window that
NOTE
Gray color for a Voice name
indicates that the
corresponding Voice part is
currently turned off.
NOTE
You can change the timing in
which the One Touch Settings
change with MAIN VARIATION
[A] − [D] changes. To do this,
touch [Menu]  [StyleSetting]
 [Setting] then set the OTS
Link Timing parameter. For
details, refer to the Reference
Manual on the website.