Playing A Style's Rhythm Channels Only; Adjusting The Volume Balance/Channel Muting - Yamaha PF-1000 Owner's Manual

Playing a Style's Rhythm Channels only

1
Select a style (page 59).
2
Set to off.
ACMP AUTO FILL IN
BREAK INTRO
3
Play along with the rhythm playback.
The Tempo can be adjusted using the TEMPO [–][+] or [TAP TEMPO] buttons.
If you tap the [TAP TEMPO] button, the tempo will adjust to the same speed that
you tapped.
Press the STYLE CONTROL [START/STOP]
E
ND
button again to stop the rhythm playback.

Adjusting the Volume Balance/Channel Muting

BALANCE display
STYLE part (Auto
Call up the
Accompaniment section)
BALANCE
display.
Adjust the output level of the Part.
BALANCE
CHANNEL
ON/OFF
CHANNEL ON/OFF display
PART
Call up the
Channel ON/
Call up the STYLE display by pressing the [CHANNEL ON/OFF]
OFF display.
button, then turn the instrument you want to cancel off. To listen to
only one instrument by itself, hold down the appropriate button for
the channel to set the channel to SOLO. To cancel SOLO, simply
press the appropriate channel button again.
OTS LINK
MAIN
A B C D
STYLE CONTROL
SONG part
Rhythm starts.
ENDING/rit. SYNC.STOP SYNC.START START/STOP
MIC part
Styles
The Rhythm channels are
part of the styles. Each style
has different rhythm pat-
terns.
You can also start the
rhythm simply by playing a
key on the keyboard, if Sync
Start is enabled (turn on the
[SYNC.START] button).
When selecting the style
group "PIANIST," the
rhythm doesn't sound.
When you want to use any
of the styles, always make
sure that ACMP is turned
on.
Parts played from the
keyboard (MAIN/LAYER/
LEFT)
Channel
Refers to the MIDI channel
in the song data (page 147).
The channels are assigned
as shown below.
Song
1 - 16
Accompaniment Style
9 - 16
PF-1000
61