Display Screens - Motorola iDEN i930 Field Service Manual

BASIC LEVEL TEST MODES AND PROCEDURES: Test Modes
6.1.2 Trace Mode Display Screens
Display screens on this unit provide information that is useful for troubleshooting purposes. These
displays appear only when the unit is placed in Debug Mode (see "Entering Debug Mode" on page
6-1).
To navigate through the screens, press the appropriate scroll key to highlight the desired screen, and
then press the View option key. Additional screens can be viewed when Option 9 (or More) is
displayed at the bottom of the screen. To select a choice within a screen, press the Select option key.
To exit from a choice or screen, press the Back option key.
Table 6-1. Display Screens
Name
Unit Info
• Phone Model
• CP Ver
• USR Ver
• CSD Ver
• Software
• Tegic
• Flash Packs
Total Usage
System Status
N6:1 Intrcnct
N6:1 Dispatch
GPS
6-2
Description
Displays the unit model number and product sub ID, such as i930 and A.
Displays the Codeplug Version. The first half of the line displays the codeplug structure and
default version; the second half displays the codeplug bandmap.
Version of carrier specific modification to the product code plug. Programmed at shipment.
Displays the Customer Static Data version. The first number indicates the customer. The
second number indicates the structure revision. The third number indicates the data revision.
Displays the current software version programmed in the unit, as well as the software type
(RSS model) and build date.
Text 9 code version/LDB version.
Version of the preferred language: French, Spanish, Hebrew, Korean, or Portugese and the
associated Font Pack.
Displays the number of minutes the unit has used a traffic (dispatch and interconnect) or a
Packet Data channel since manufacture.
The first line displays the SQE and Band (outbound signal quality and frequency band). The
second line displays the Carrier. The third line displays the Outbound Signal Quality. The
fourth line displays current temperature, the difference between the current temperature and
the temperature two seconds ago and the amount of cutback. The fifth line is the AGC Level
and the sixth line is the channel code.
Parameter details for the 6:1 Interconnect Feature enabling transmission of RF-originated
messages through the telephone system.
Line 1 shows MS, the Mobile Subscriber's ability to support 6:1 Interconnect and FNE, the
Fixed Network Equipment's ability to support 6:1 Interconnect respectively. Numbers 0 or
1 indicate No or Yes respectively.
Line 2 shows I, Interleave of the current channel, O, Offset of the current channel, and S,
Sub-slot of the current channel. Values for Interleave are 1 – 24, Offset values are 0 – 23,
and Sub-slot can be A, B or N.
Line 3 shows ECC, Extended Color Code and PO, Primary Control Channel Offset of the
current carrier.
Values for ECC are 0 – 16. Values for PCCH Offset are 0 - 11.
During Trace Mode, radio activity such as interconnect, dispatch call, packet data session,
registration, or location update information will automatically update every 2 seconds.
Displays status of a new 6:1 dispatch call. Data displayed shows "MS 1 FNE 1". All other
data combinations are old 6:1 dispatches.
Displays the GPS location, time info, assist, navigation, summary, GPS version.
68P80401P03-O