Quilting; Using The Quilting Guide Bar; Q1-Q3 Patchwork Piecing; Angle Scales On The Needle Plate - Janome HORIZON Memory Craft 9480 QC PROFESSIONAL Instruction Book

(2)
(3)
(4)
(1)
(2)
(2)
(1)
(2)
(1)
(1)
(1)
(2)
(1)
(3)

Quilting

Using the Quilting Guide Bar

The quilting guide bar is helpful when sewing parallel,
evenly spaced rows of stitches.
Insert the quilting guide bar into the hole in the back of
the foot holder. Slide the quilting guide bar and set it to
the desired spacing.
(1) Quilting guide bar
(2) Hole
Sew rows of stitches while tracing the previous row of
stitches with the quilting guide bar.

Q1-Q3 Patchwork Piecing

Patterns Q1 to Q3 are special stitches for seaming
patchwork pieces.
Patterns Q2 and Q3 are for patchwork piecing with 1/4˝
and 7 mm seam allowances respectively.
Use 1/4˝ seam foot O.
Place the patchwork pieces with the right sides together.
Sew while guiding the edge of fabric along the guide.
(1) Guide
(2) Right side of the fabric
You can sew a 1/4˝ allowance from the guide line with
1/4˝ seam foot O (without guide) as shown.
Align the guide line with the 1/4˝ guide of the foot and
(5)
sew.
(3) Guide line
(4) 1/4˝ guide
To sew 1/4˝ seam allowance from the right fabric edge,
(6)
align the right edge of the foot and the edge of the fabric
and sew.
(5) Right fabric edge
(6) Right edge of the foot

Angle Scales on the Needle Plate

You can easily seam patchwork pieces at the desired
angle without marking, by using the angle scales on the
needle plate.
The angle scales are marked at 45, 60, 90 and 120
degrees.
Use the broken lines when piecing the patchwork pieces
with 1/4˝ seam foot O as illustrated.
(1) Broken line
NOTE:
Use the solid lines when piecing the patchwork pieces
with zigzag foot A. Align the edge of the fabric to the
1/4˝ seam guide line.
(2) Solid line
(3) 1/4˝ seam guide line
79