Knee Lifter; Using The Cloth Guide - Janome HORIZON Memory Craft 9480 QC PROFESSIONAL Instruction Book

(1)
(1)
(1)
(4)
(3)
(2)
(4)
(5)
(2)
(3)

Knee Lifter

The knee lifter is extremely helpful when sewing
patchwork, quilting, etc. since it allows you to handle the
fabric while your knee controls the presser foot.
Attaching the knee lifter
Match the ribs on the knee lifter with the notches in the
knee lifter socket and insert the knee lifter.
(1) Knee lifter
(2) Rib
(3) Knee lifter socket
Adjusting the knee lifter
The angle of the knee lifter can be adjusted to fit the user.
Loosen the setscrew and slide the angle bar in or out to
adjust the angle of the knee lifter.
Tighten the setscrew to secure the angle bar.
(4) Setscrew
(5) Angle bar
Using the knee lifter
Push the knee lifter with your knee to easily move the
presser foot up and down.
You can control how high the foot rises by the amount of
knee pressure you exert.

Using the Cloth Guide

Remove the extension table and attach the extra wide
table (refer to page 9).
Attach the cloth guide to the free-arm by pushing the
cloth guide down to snap it in place.
Slide the cloth guide to the desired position.
Place the fabric with its edge against the guide and sew.
(1) Cloth guide
(2) Free-arm
(3) Guide
(4) Edge
35