Conceal® Zipper (Optional) - Janome HORIZON Memory Craft 9480 QC PROFESSIONAL Instruction Book

(1)
(6)
(5)
Basting
(3)
Lock-a-Matic
(9)
(7)
(10)
CONCEAL® Zipper (Optional)
Press the optional foot key and the optional sewing
application menu will open.
Press the CONCEAL® Zipper* key and the window will
show the step-by-step keys.
Prepare a CONCEAL® zipper* 2 cm (3/4˝) longer than
the opening size.
Press the sewing step key and machine settings will
automatically adjust to suit each sewing step.
(3)
Attach zigzag foot A. Place the right sides of the fabric
together and sew to the end of the opening with a 2 cm
(3/4˝) seam allowance. Press the reverse button to lock
the seams.
(4)
Baste the opening 0.3 cm (1/8˝) inside of the seam line.
(2)
Fold up the left seam allowance to the bodice. Open the
(8)
zipper and put it on the right seam allowance with the
back side up.
Place the right zipper teeth next to the fold and pin it in
place.
Replace the foot with CONCEAL® zipper foot Z*.
Raise the zipper teeth on the right and lower the foot so
(11)
the left groove of the foot catches the zipper teeth.
Stitch through the zipper tape and fabric up to the end of
the opening.
Reverse the stitches to secure the seam.
* "CONCEAL" is a registered trademark of YKK
137
(1) Optional foot key
Lock-a-Matic
(2) End of opening
(3) 2 cm (3/4˝)
(4) Zipper size
(5) Opening size
Basting
(6) 0.3 cm (1/8˝)
(7) Left seam allowance
(8) Zipper teeth
(9) Fold
Right of teeth
(10) Left groove
(11) Zipper tape
Corporation.