Table of Contents
Advertisement
6.
7.
8.
6. The buttonhole is sewn automatically in the sequence
shown.
When the buttonhole is finished, the machine will
stop automatically with the needle in the up position.
Press the thread cutter button and remove the fabric.
7. After you finish buttonhole sewing, push the
buttonhole lever up as far as it will go.
8. Place a pin just below the bartack at each end to
prevent accidentally cutting the threads.
Cut the opening with the seam ripper.
Use a punch to open a keyhole buttonhole.
NOTE:
A punch is not included with this machine.
Double Layer Buttonhole
To make a sturdy buttonhole, sew another layer of
buttonhole stitches over the previous stitches.
After the buttonhole is finished, simply start the machine
again.
Do not raise the foot or buttonhole lever.
Do not reselect the pattern.
NOTE:
Turn off "Thread Cut after Auto-Lock" option when you
make a double layer buttonhole (refer to page 143).
60
Advertisement
Table of Contents
