Favorite Stitch Adjustment - Janome HORIZON Memory Craft 9480 QC PROFESSIONAL Instruction Book

(1)
(2)
(3)
(5)

Favorite Stitch Adjustment

You can save customized stitch settings (stitch length,
stitch width, thread tension and presser foot pressure,
depending on the selected stitch patterns) as "Favorite
Stitch Adjustment". When the favorite stitch adjustment
option is turned ON (refer to page 146), the last-used
customized stitch settings are automatically assigned
when the stitch pattern is selected.
(1) Favorite Stitch Adjustment
NOTE:
• Favorite stitch option cannot be assigned for created
• Favorite stitch option cannot be used in monogram
Example: To change the preset value of the needle drop
position from "4.5" to "5.0".
Turn the Favorite Stitch Adjustment option ON (refer to
page 146).
Select stitch pattern U1.
Press the setting bar. The manual setting window
expands to show more options.
The favorite stitch key appears on the manual setting
window.
Change the needle drop position from "4.5" to "5.0" by
turning the stitch width adjusting dial or pressing "+" key.
Press the favorite stitch key.
The dialog box will open.
Press the save favorite key to register the favorite stitch
settings.
(2) Setting bar
(4) (6)
(3) Favorite stitch key
(4) Save favorite key
The square bracket indicates that the customized preset
stitch value is applied to the setting.
To delete favorite stitch settings, press the favorite stitch
key and press the delete key.
(5) Square bracket
(6) Delete key
54
stitch (CS).
mode.