15. Always unplug this sewing machine from the electrical outlet when removing covers, lubricating, or when making any other adjustments mentioned in this owner’s manual. SAVE THESE INSTRUCTIONS The design and specifications are subject to change without a prior notice. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
10. Satin Stitch Foot F 11. Embroidery Foot P 12. Zigzag Foot A (comes attached to the machine) 13. Blind Hem Foot G 14. Overedge Foot C 15. Foot Holder (comes attached to the machine) www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Page 6
14. Spool Holder (Small) 15. Bobbins 16. Spool Stand 17. Quilting Bar Detachable extension table for accessory storage Sewing accessories are stored in the Extension Table. To open, lift the cover toward you as illustrated. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
- darning socks or mending knees, elbows or children’s wear. For flat-bed sewing Position the Tabs on the Base Tab Holes and push down gently. Tabs Base Tab Holes www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Janome MC9700 Sewing Machine Instruciton Manual GETTING READY TO SEW Connecting the Power Supply The Memory Craft 9700 is equipped with an auto voltage system, which automatically adjusts the equipment to any local power supply voltage between 100 and 240V, 50/60 Hz.
4 Up/Down Needle Button Press this button to bring the needle bar up or down. 5 Speed Control Lever See page 8. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Foot controller Model 21371 is for use with sewing machine model MC9700. NOTE: The Memory Craft 9700 is equipped with an automatic shutdown safety feature to prevent overheating whenever the machine is running overloaded. Follow the safety instructions that appear on the Visual Touch Screen.
Groove of the Foot Holder. Lower the Presser Bar to lock the foot in place. 1 Red Button 2 Foot Holder 3 Presser Foot 4 Groove of Foot Holder 5 Pin on Foot www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Page 12
Loosen the thumb screw and remove the Foot Holder to the rear. Attach Embroidery Foot P to the presser bar from behind. Tighten the thumb screw securely with the screwdriver. 6 Embroidery Foot P www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
10 Automatic Buttonhole Foot R: This foot is for sensor buttonholes and for darning. Place a button in the button holder in the rear of the foot. This automatically sets the buttonhole size. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Hole beside the horizontal spool pin. Place the Felt on the spool pin and place a spool of thread on it as shown. 4 Additional Spool Pin 5 Felt 6 Hole 7 Spool Stand www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
You can use either the Foot Control or the Start/Stop Button to wind the Bobbin. For safety purposes, the machine will stop automatically 1.5 minutes after starting bobbin winding. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
5 Pull out about 10 cm (4") of thread to the rear. NOTE: A Threading Chart is shown on the Hook Cover Plate for your reference. Reattach the Hook Cover Plate. 3 Threading Chart www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Lower Thread Guide. 6 Slide the thread behind the Needle Bar Thread Guide on the left. 7 Thread the needle from front to back by hand or using the Built-in Needle Threader. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
7 Remove the loop from the threader and pull out the thread end from the needle eye. NOTES: The automatic threader works well with the threads #50-90 and needles #11-16, the blue tipped needle as well. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Draw up the needle thread to bring up a loop of the Bobbin Thread. 1 Needle Thread 2 Up/Down Needle Button 3 Bobbin Thread 3 Slide 10 cm (4") of both threads to the back under the presser foot. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Needle thread tension is too loose: If the needle thread appears on the wrong side of the fabric. Tighten the needle thread tension by moving the dial to a higher number. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Turn the handwheel toward you to check if the feed dog comes up after setting the lever in the up position. The feed dog will automatically drop when the embroidery mode, basting stitch, button sewing. has been selected. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
When you select a pattern or function on the screen, it is not necessary to press hard; just touch the keys with your fingertip. Use a dry soft cloth to wipe the screen. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Press the Plus key to increase the timer setting. Press the Minus key to decrease the timer setting. To turn off the Eco mode, Press the Plus key until “OFF” shows in the box. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Page 25
Press the page back key to view the previous page. Register key Press this key to register the settings and return to the previous screen. Return key Press this key to return to the previous screen without registering the settings. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Page 26
Formatting will erase all data stored in the memory. 17 Reset all to default Pressing the key will return all settings except for language to defaults (the same settings as when you purchased the machine). www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Janome MC9700 Sewing Machine Instruciton Manual Language Selection You can select one of the following 11 languages by pressing the corresponding key. English French Spanish Italian Dutch German Portuguese Swedish Russian Finnish Japanese www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
(8) Twin needle key Press this key when you wish to sew with a twin needle. The key will be grayed out if the selected stitch is not suitable for twin needle sewing. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Up/Down button. Raise the presser foot. Pivot the fabric around the needle to change the sewing direction as desired. Lower the presser foot and start sewing in a new direction. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Page 30
NOTE: The number indicates the distance from the center needle position. 1 Guide Lines 2 Edge of the Fabric 3 Center Needle Position Number Distance (cm) Distance (inch) www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
1 Needle Drop Position Adjusting Keys 2 Stitch Length Adjusting Keys 3 Default Key: Resumes the default settings. 4 Cancel Key: Cancels the last changes to setting. Default 5 OK Key: Enables the current setting. 2.20 Cancel www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Page 32
When you press the key, the needle moves to Cancel the left. Changing stitch length Press the key to decrease the stitch length. Default Press the key to increase the stitch length. 2.20 Cancel www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
10 Stretch Stitch This is a narrow stretch stitch designed to eliminate puckering on knit fabrics and bias seams, while permitting the seam to be pressed completely open flat. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Default 1.50 2 Stitch Length Adjusting Keys 3 Default Key: Resumes the default settings. Cancel Cancel 4 Cancel Key: Cancels the last changes to setting. 5 OK Key: Enables the current setting. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Press the key to decrease the Stitch Length. Press the key to increase the Stitch Length. Default Default 1.50 2 Stitch Length Cancel Cancel After adjusting the settings, press the OK key. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
When you use the Overedge Foot C or the Overcasting Foot M, you must set the zigzag width at 5.0 or wider to prevent the needle from hitting the Foot Wires. 2 Foot Wires www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
When you use Overedge Foot C or Overcasting Foot M, you must set the zigzag width at 5.0 or wider to prevent the needle from hitting the Foot Wires. 3 Foot Wires www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
4 Guide 5 Folded Edge While sewing, guide the folded edge along the guide on the foot. Open the fabric with the right side up. 6 Right Side of Fabric www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Page 39
2 Default Key: Resumes the default settings. 3 Cancel Key: Cancels the last changes to settings. 4 OK Key: Enables the current setting. 5 Guide on the Foot 6 Left Needle Drop position 7 Right Needle Drop Position www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
2 1 cm (3/8”) 3 Opening Size 4 Zipper Size 5 Slider 6 Zipper Teeth 7 Zipper Tape 8 End of the Opening 9 2 cm (13/16”) Seam Allowance 10 Zipper Opening 11 Reverse Stitches www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Page 41
Lower the needle slightly into the fabric. Raise the foot and open the zipper. Lower the foot and stitch the remainder of the seam. 9 Slider 10 5 cm (2”) www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Page 42
Move the slider behind the presser foot. Lower the presser foot and stitch the remainder of the seam. After finishing, remove the basting stitches. 16 Basting Stitches www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Screw on the back of the Foot Holder and insert the Quilting Bar into the Hole of the Foot Holder. Set the Quilting Bar to the desired position, then retighten the screw. 1 Quilting Bar 2 Screw 3 Hole www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
This buttonhole can be used on stretch fabrics. It can be used as a decorative buttonhole. 19 Knit Buttonhole This buttonhole is suitable for knit fabrics. It can also be used as a decorative buttonhole. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
If it is difficult to fit the button through the test buttonhole, you can lengthen the buttonhole by pulling the Button Holder back a little. The length of the buttonhole will be increased. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Page 46
Needle Thread Bobbin Thread Starting Point NOTE: Make sure there is no gap between the Slider and Spring Holder, otherwise the left and right lengths will be different. Slider Spring Holder Sewing Gap www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Page 47
Remove the fabric and place a pin just below the bartack at each end to prevent accidentally cutting threads. Cut the opening with the Seam Ripper. Use an Eyelet Puncher to open a keyhole buttonhole. 1 Seam Ripper 2 Eyelet Puncher www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
NOTES: Set the stitch width in accordance with the thickness of the cord used. To cut the buttonhole opening, refer to the instructions on page 45. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Press the key to make the buttonhole stitches Default denser. 0.45 Cancel NOTE: Default setting is 0.45 The manual settings will be canceled if you select other patterns or turn the power off. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
If you wish to change the buttonhole width and stitch density press the Adjust key. If you wish to sew a buttonhole longer than the size permitted by the Automatic Buttonhole Foot R, use Satin Stitch Foot F. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Page 51
The MC 9700 will sew another buttonhole identical to the first one each time you step down on the Foot Different size Cancel Control. To cut the buttonhole opening, refer to the instructions on page 45. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
2 Bobbin Thread 3 Needle Thread NOTE: The Feed Dog will be raised automatically after selecting other stitch patterns. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Janome MC9700 Sewing Machine Instruciton Manual Darning Darning Auto Sew to length The Memory Craft 9700 automatically darns rips and required, then press " ". holes. Large and small holes can be mended quickly and easily with this unique stitch.
Page 54
You can correct the unevenness of darning by pressing the key. Cancel Cancel If the left corner is lower than the right side, press the key to correct it, and vice versa. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
To sew another tack in the same size, simply restart the machine and it will stop automatically when finish Different size Cancel sewing. To sew the next tack in a different size, press the Cancel key. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Open the eyelet with an awl, puncher or pointed scissors. To adjust the shape of an eyelet: If the eyelet opens, press the key. Default If the eyelet overlaps, press the key. Cancel 1 Shape Adjusting keys www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
To sew Hold the fabric taut and depress the Foot Control or press the Start/Stop Button. The machine will take one stitch and stop automatically. Slide the fabric back for the next stitch. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
OK key: Press the OK key. The setting will be 0.40 registered and the screen returns to the previous window. Cancel NOTE: The manual settings will be canceled if you select other patterns or turn the power off. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Page 59
Press this key to show the all the programmed patterns. The key will change to “ ” after starting the machine. Pressing this key allows you to sew the programmed patterns from the beginning. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
The machine will sew the pattern combination repeatedly. NOTE: If you press the Auto-Lock button in the middle of Adjust sewing, the machine will automatically stop after the current pattern is completed. 2 Auto-Lock button www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Start to sew. Default 0.40 Cancel NOTE: If you press the Auto-Lock Button in the middle of a programmed pattern, the machine will stop automatically after the current pattern is completed. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Select the Pattern 30. Start to sew. Adjust NOTE: If you press the Auto-Lock Button in the middle of a programmed pattern the machine will stop automatically after the current pattern is completed. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
NOTES: You can sew shell tucks on knits or soft silky woven in any direction. If you sew rows of shell stitches, space the rows 1.5 cm (5/8”) apart. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
2 Edge of the Applique 3 Slit NOTE: When changing the sewing direction at a corner or curve, lower the needle into the applique at the left swing and turn the fabric to a new direction. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
1 Pattern 55 2 Pattern 45 3 Pattern 46 NOTE: If you press the Auto-Lock Button in the middle of a programmed pattern the machine will stop automatically after the current pattern is completed. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
The screen shows the patterns 66 and 72. Press the key. Adjust The screen shows the pattern combination with the French Knot Hemstitch Auto pattern 65 at the head. The machine will sew the pattern combination from the beginning. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Change the elongation ratio by pressing the Plus or Minus key. Default 0.40 Press the OK key to register the adjustment and the screen will go back to the previous display. Cancel Start to sew. Decorative French Knot Auto www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Press the Cursor key to move the cursor under the pattern 32. Adjust Select the pattern 66. Decorative French Knot Auto The pattern 66 will be inserted before the pattern 32. Decorative French Knot Auto www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Next Page key to view the remaining patterns in the combination. Press the Return Key to go back to the original window. 1 Next Page Key 2 Return Key 3 Page Number www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
This pattern is not for twin needle pressing the Twin Needle key. Sewing. Press the OK key to return to the previous screen. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Page 71
Thread the needles from the front to back. NOTES: The Built-in Needle Threader cannot be used for the twin needle. When changing the sewing direction, raise the needle and turn the fabric. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
9 Magnifier key Pressing this key enlarges the Letter/Number keys to make entry easier. Press the Return key to return to the original screen. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Large Size. Block Auto Press “B”, the cursor shifts to the right and ”B” is automatically memorized. The machine will sew the monogram and stop automatically when finished. & www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Do not turn the power off or eject the card when the warning sign or hourglass is shown on the visual touch screen. Otherwise, data stored in the memory may be lost or damaged. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Cancel Press the Cancel Cancel key if you do not wish to overwrite it. You may need to change the file name and save the file under the different name. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
If the right row is denser, turn the dial toward “–”. If the left row is denser, turn the dial toward “+”. NOTE: Return the Feed Balancing Dial to its neutral position when sewing is finished. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Template for Embroidery Hoop (B) 5 Starting Point for Built-in designs and monograms 6 Indentations for Positioning the Template NOTE: The four indentations on the template do not correspond with reference lines. STARTING POINT www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Increase the tension by turning the dial to a higher number. Pressure Dial For embroidery, set the Pressure Dial at “2”. Needles Use size 11 needles for fine fabrics. For medium to heavy weight fabrics, use size 14 needles. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Outer Hoop on a flat surface. For thin and stretchy fabrics use an adhesive type Stabilizer (iron-on type) on the wrong side of the fabric. More than one layer may be required. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Pass the needle thread through the Hole in the Embroidery Foot and draw it up to the thread holder. Hang the thread on the thread holder from the front to back. 1 Hole in the Embroidery Foot 2 Thread Holder www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Embroidery Mode: 1 Built-in Designs The Visual Touch Screen shows the Built-in Design Edit window when the Embroidery Mode Key is pressed. the Memory Craft 9700 provides 95 ready to sew built-in embroidery designs. Designs Hoop Size A(F): 126 110mm...
Adjust the hoop position with the jog keys so that the needle drop position comes right above the center of the reference lines on the fabric. 5 Needle drop position 6 Centerlines www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
The embroidery stitch pattern position against the centerlines is indicated on the template sheets. For embroidery sewing with the PC cards, use the included template sheets to set the correct sewing position. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
You can select European accented letters, such as the diaeresis by pressing this key. Edit 10 European Accented Letter key Upper/Lower case key You can select upper or lower case letters by pressing this key. 11 Upper/Lower Case key www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Page 86
File Save window will appear. Magnifier key Pressing this key will enlarge the letter keys to make entry easier. Return key Press this key to return to the previous screen. Font Font www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
A(F): 126x110mm Change key before sewing. The machine will stop automatically when each letter has been sewn. Change the thread and start sewing Bear Color again. Change 1 Color Change key Edit www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Page 88
Press the Start/stop button to start sewing again. The machine will stop automatically when the monogram is completed. You can sew the monogram vertically if you select a vertical orientation after entering the characters. 3 Monogram in vertical orientation www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Change NOTES: The 3-Letters monogram will be sewn in the same way as the 2-Letters monogram. Edit The starting position for the 2-letters and 3-letters is in the center of the hoop. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
A(F) A(F) A(F) Select the letter “E”. Gothic BEAT The letter “E” will be inserted between “B” and “A”. A(F) A(F) A(F) www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
The selected design and its color parts will be shown in their sewing order. CAUTION: Edit Do not turn the power off or eject the card while the warning sign or hourglass is displayed. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Hoop Size A(F): 126 110mm Press the Card Reader Key. The Pattern Selection Screen will appear. 4 Card Reader Key NOTE: The key operation is the same as for built-in designs. See pages 80-82. Edit www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Edit selected hoop will open. 4 Editing Screen for the Hoop B Size 5 Editing Screen for the Hoop A (F) Edit Cancel B: 140x200mm Edit Size Edit Cancel A(F): 126x110mm www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
To select the pattern to edit, press the pattern Hoop Size A(F): 126 110mm selection key of the desired pattern on the editing screen. Edit The selected pattern will be framed. Edit Size Edit Cancel B: 140x200mm www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Cancel Press the Cancel key to return to the default Cancel setting (Hoop B). 4 Cancel Key 5 Editing Screen for the Hoop A Edit Size Size Edit Cancel Cancel A(F): 126x110mm www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Press the Magnifier key to show a magnified image of the selected pattern. Press the Return key to return to the previous screen. 7 Magnifier Key 8 Original image 9 Magnified image www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Do not turn the power off or eject the card when the warning sign or hourglass is displayed on the visual touch screen. Otherwise, data stored in the memory may be lost or damaged. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Cancel Cancel Press the Cancel key if you do not wish to overwrite it. You may need to change the file name and save the file under the different name. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Size Edit Cancel Cancel A(F): 126x110mm Select “A” (Upper case letter in Gothic style). Gothic A(F) Font Edit Press the Letter Case key to select lower case letters. Gothic A(F) Font Edit www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Page 100
Ready to Sew embroidery screen. 6 min 4 Colors Start the machine to sew the combined design. Size 31x36mm A(F):126x110mm Beige Cardinal Bright Toast Gray Green Edit 1 Stitched Result of the Combined Design www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
The confirmation window will appear. Press the OK key if you are sure you want to delete it. Cancel When you press the Cancel key, the file will not be deleted. 6 Cancel Key www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Adjusting patterns displayed on the screen. Changing needles NOTE: Inserting the bobbin Press the Return key to go back to the previous screen. Sensor Buttonholes Threading the machine Winding the bobbin Changing needles www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Guide Pins with the Guide Holes on the needle plate and tighten the screw. 9 Stopper 10 Knob 11 Guide Holes NOTE: After cleaning the machine, make sure the needle and presser foot are attached. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Open the faceplate. Pull out the bulb from the lamp socket. 1 Lamp Socket 2 Light bulb To replace: Insert the bulb into the opening of the socket. Close the face plate. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
5. The presser foot pressure is not adjusted correctly * When sewing extremely lightweight materials place interfacing underneath the fabric. See page 77. 6. The fabric is not pulled tightly enough on the embroidery hoop. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Page 106
See page 13. 2. The control circuit is not working correctly. do not work. Turn the switch off and turn it on again. 3. The key position is out of alignment. See page 24. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...
Janome MC9700 Sewing Machine Instruciton Manual DESIGN CHART Pattern 88 is a center lines for calibration of the Cloth Setter. www.janomeflyer.com Memory Craft 9700 Owners Manual/ User Guide...