System Fan; Removing The System Fan For Computers Shipped With A Plastic Chassis; Installing The System Fan For Computers Shipped With A Plastic Chassis - Dell Inspiron 14 5440 Owner's Manual

System fan

Removing the system fan for computers shipped with a plastic
chassis
Prerequisites
1. Follow the procedure in
NOTE: Ensure that your computer is in Service Mode. For more information, see step 6 in,
computer.
2. Remove the base cover for computers shipped with a plastic
About this task
The following image indicates the location of the system fan and provides a visual representation of the removal procedure.
Figure 32. Removing the fan
Steps
1. Disconnect the fan cable (FN1) from the system board.
2. Remove the two screws (M2x4) that secure the fan to the palm-rest and keyboard assembly.
3. Lift the fan off the palm-rest and keyboard assembly.
Installing the system fan for computers shipped with a plastic
chassis
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
58 Removing and installing Customer Replaceable Units (CRUs)
Before working inside your computer.
chassis.
Before working inside your