Table of Contents
Advertisement
Figure 42. Disconnecting the battery cable
Steps
1. Unroute the battery cable from the routing guides on the battery.
2. Open the latch and disconnect the battery cable from the connector on the battery.
CAUTION:
DO NOT pull the battery cable to disconnect it from the battery, it may damage the battery or the
battery cable.
NOTE:
To disconnect the battery cable, first push the latch downward to release the connector, and then pull the
connector upward to disconnect it from the battery.
Connecting the battery cable
CAUTION:
The information in this installation section is intended for authorized service technicians only.
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the battery cable and provides a visual representation of the installation procedure.
Removing and installing Field Replaceable Units (FRUs)
69
Advertisement
Table of Contents
