System fan
Removing the system fan
Prerequisites
1. Follow the procedure in
2. Remove the
SIM
card.
3. Remove the
microSD
4. Remove the
base
cover.
5. Remove the battery.
About this task
The following images indicate the location of the system fan and provide a visual representation of the removal procedure.
Steps
CAUTION:
Do not damage the thermal fan sponge during any replacement procedures. Damaging the sponge
reduces the effectiveness of the heat dispersion.
1. Disconnect the system-fan cable from the system board.
2. Remove the two screws (M2x3) that secure the system fan to the palm-rest assembly.
3. Lift the system fan, along with its cable, off the palm-rest assembly.
Installing the system fan
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the system fan and provide a visual representation of the installation procedure.
Before working inside your
card.
computer.
Removing and installing components
49