Wakeup Feature Setup - Yaesu VX-6R Operating Manual

Dual band heavy duty submersible transceiver
Hide thumbs Also See for VX-6R:
Table of Contents

Advertisement

M
The Wakeup feature is similarly to the Receive Battery Saver. However, it is a newer, more
advanced feature which conserves battery life by providing a longer "sleep" time than the
regular Receive battery Saver. The Wakeup feature, once engaged, operates while the trans-
ceiver is turned off ("
To set up the Wakeup feature:
1. Press the [ F/W ] key, then press the [ 0 ( SET )] key to enter the Set mode.
2. Rotate the DIAL knob to select Set Mode Item 72:
3. Press the [ 0 ( SET )] key momentarily to enable adjustment of this
Set Mode Item.
4. Rotate the DIAL knob to select the desired "sleep" duration.
5SEC 10SEC 20SEC 30SEC
Based on the selected time value, the radio will periodically check
the operating frequency which it was on when the radio was turned off for activity. If a
signal is received on the frequency which is strong enough to open the Squelch, the
radio will turn itself on fully. If the EAI feature is activated when the radio was turned
off, the radio also checks on the EAI frequency (Memory Channel "
EAI
:
Checks the EAI frequency (Memory Channel "
coded signal is received on the EAI frequency, the radio will turn itself on and then
automatically transmit in accordance with the setting of Set Mode Item 18:
OFF
:
Disables the Wakeup feature.
5. When you have made your selection, press the PTT switch to save the new setting and
exit to normal operation.
6. If you wish to disable the Wakeup feature, just repeat the above procedure, rotating the
DIAL knob to select "
When the radio is turned off, the Wakeup feature will be engaged,
WAKEUP
and the "
You may observe a low-level "pop" noise while the Wakeup feature
is polling; you may disable this popping by pressing the [ MODE ( SP
S ) SQ TYP ] key in step 4 above (the "
pear). However, the battery life will be reduced somewhat.
You may cancel the Wakeup feature temporarily by pressing the PWR switch while the
Wakeup feature is engaged.
78
S
W
WAKEUP
" will appear on the LCD).
:
OFF
" in step 4 above.
"notition will be been on the display.
F
S
WAKEUP
EAI
") every 5 seconds. If a properly-
" notation will disap-
VX-6R O
.
EAI
") for activity.
EAI
.
M

Advertisement

Table of Contents
loading

Table of Contents