Table of Contents
Advertisement
Set Mode Item 59 SQL
Function: Sets the Squelch threshold level.
Available Values: LVL 0 - LVL 15 (Narrow FM), LVL 0 - LVL 8 (Wide FM)
Default: LVL 1 (Narrow FM), LVL 2 (Wide FM)
Set Mode Item 60 SQL.TYP
Function: Selects the Tone Encoder and/or Decoder mode.
Available Values: OFF/TONE/T SQL/DCS/RV TN
Default: OFF
TONE: CTCSS Encoder
TSQL: CTCSS Encoder/Decoder
DCS:
Digital Coded Encoder/Decoder
RV TN: Reverse CTCSS Decoder (Mutes receiver when matching tone is received)
Note: See also Set Mode Item 58: SPLIT regarding additional selections available during
"Split Tone" operation.
Set Mode Item 61 STEP
Function: Setting of the synthesizer steps.
Available Values: 5.0k/10.0k/12.5k/15.0k/20.0k/25.0k/50.0k/100.0k, or AUTO
Default: AUTO (Step automatically changes according to operating frequency.)
Set Mode Item 62 SU1.ALT
Function: Selects the measurement units for the altimeter (require optional SU-1), and
correcting the altimeter.
Available Values: M (meter)/Ft (feet), offset: –1000 to +1000
Default: Depends on the transceiver version.
OPTION
" will be displayed if the SU-1 is not installed.
Note: "
Set Mode Item 63 SU1.BRM
Function: Selects the measurement units for the Barometric Pressure (require optional
SU-1), and correction of the Barometric Pressure.
Available Values: HP (hpa)/MB (mbar)/HG (mmHg)/IC (inch), offset: –1000 to +1000
Default: Depends on the transceiver version.
OPTION
" will be displayed if the SU-1 is not installed.
Note: "
Set Mode Item 64 SU1.SET
Function: Selects the display of the sensor units' information.
Available Values: OFF/BARO/ALTI
Default: OFF
Note: The barometric pressure (BARO) and altitude (ALTI) information require the op-
tional SU-1.
VX-6R O
M
S
M
M
101
Advertisement
Table of Contents
