Installation Of Fnb-80Li Battery Pack; Battery Charging - Yaesu VX-6R Operating Manual

Dual band heavy duty submersible transceiver
Hide thumbs Also See for VX-6R:
Table of Contents

Advertisement

I
The FNB-80LI is a high-performance Lithium-Ion battery providing high capacity in a
very compact package. Under normal use, the FNB-80LI may be used for approximately
300 charge cycles, after which operating time may be expected to decrease. If you have an
old battery pack which is displaying capacity which has become diminished, you should
replace the pack with a new one.
Install the FNB-80LI as shown in the illustration.
Close the Battery Pack Latch on the bottom of the radio.
1) Do not attempt to open any of the rechargeable Li-Ion packs, as personal
injury or damage to the Li-Ion pack could occur if a cell or cells become acci-
dentally short-circuited.
2) Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.
If the battery has never been used, or its charge is depleted, it may be charged by connect-
ing the NC-72B/C Battery Charger, as shown in the illustration, to the EXT DC jack. If
only 12 ~ 16 Volt DC power is available, the optional E-DC-5B or E-DC-6 DC Adapter
(with its cigarette lighter plug) may also be used for charging the battery.
The display will indicate "
battery is being charged. When charging is finished, the display will change to indicate
CHGFUL
" and the TX/BUSY indicator will glow green.
"
AC line Outlet
NC-72
VX-6R O
I
FNB-80LI B
B
CHGING
," and the TX/BUSY indicator will glow red, while the
M
C
E-DC-5B
A
P
E-DC-6
9

Advertisement

Table of Contents
loading

Table of Contents