Installation Of Accessories; Antenna Installation; Belt Clip & Hand Strap Installation - Yaesu VX-6R Operating Manual

Dual band heavy duty submersible transceiver
Hide thumbs Also See for VX-6R:
Table of Contents

Advertisement

I
The supplied antenna provides good results over the entire fre-
quency range of the transceiver. However, for enhanced recep-
tion on certain non-Amateur frequencies, you may wish to con-
nect an antenna designed specifically for that frequency range,
as the supplied antenna is necessarily a compromise outside the
Amateur bands, and cannot be expected to provide high perfor-
mance at all frequencies.
To install the supplied antenna, hold the bottom end of the an-
tenna, then screw it onto the mating connector on the transceiver
until it is snug. Do not over-tighten by use of extreme force.
Notes:
Never transmit without having an antenna connected.
When installing the supplied antenna, never hold the upper
part of the antenna while screwing it onto the mating connector on the transceiver.
If using an external antenna for transmission, ensure that the SWR presented to the
transceiver is 1.5:1 or lower, to avoid excessive feedline loss.
B
8
A
A
I
C
& H
S
I
VX-6R O
M

Advertisement

Table of Contents
loading

Table of Contents