Table of Contents
Advertisement
A special one-touch "HOME" channel is available for each of operating bands, to allow
quick recall of a favorite operating frequency on each band.
Home Channel storage is simple to accomplish:
1. Change the setting of Set Mode Item 28: HM RV from "REV" to "HOME," if it is not
already set to this option (see page 95).
2. Select the desired frequency, while operating in the VFO mode. Be sure to set up any
desired CTCSS or DCS tones, as well as any desired repeater offset. The power level
may also be set at this time, if you wish to store it.
3. Press and hold in the [ F/W ] key for one second.
4. While the memory channel number is blinking, just press the [ HM/RV ( EMG ) R/H ]
key. The frequency and other data (if any) will now be stored in the special HOME
channel register.
5. You may repeat this process on the other operating bands.
6. To recall the HOME channel, press the
[ HM/RV ( EMG ) R/H ] key momentarily
while operating either in the VFO or MR
mode.
The UHF HOME
channel is the one
used during "Emer-
gency Channel Operation." See
page 62 for details regarding
this feature.
VX-6R O
M
M
HOME C
BC Band
SW Band
50 MHz Ham Band
FM BC Band
Air Band
144 MHz Ham Band
VHF-TV Band
222 MHz Ham Band
430 MHz Ham Band
UHF-TV Band
Action Band
M
R
M
USA Version
D
B
USA V
30.000 MHz
59.000 MHz
108.000 MHz
146.520 MHz
174.000 MHz
222.000 MHz
446.000 MHz
470.000 MHz
860.000 MHz
M
C
EXP Version
H
C
F
EXP V
0.540 MHz
0.540 MHz
1.800 MHz
1.800 MHz
30.000 MHz
88.000 MHz
108.000 MHz
144.000 MHz
174.000 MHz
230.000 MHz
430.000 MHz
470.000 MHz
860.000 MHz
39
Advertisement
Table of Contents
