Deleting the registered nodes and rooms
Nodes and rooms registered in the 5 categories can be deleted.
1. Press and hold the FUNC knob [67 DELETE ROOM/NODE] Press the FUNC
knob.
2. Rotate the FUNC to select the desired category, then
press the FUNC knob.
3. Rotate the FUNC to select the node or room to delete,
then press the FUNC knob.
The confirmation message appears.
4. Rotate the FUNC knob to select [OK], then press the FUNC knob.
Deletes the selected node or room.
5. Press the DIAL knob, SUB DIAL knob or PTT switch to save the setting and return
to normal operation.
The DG-ID feature to access the WIRES-X node station
Set the WIRES-X, DG-ID number used when connecting to the local node station by
pressing the [D X] key.
1. Press and hold the FUNC knob [68 WIRES DG-ID] Press the FUNC knob.
2. Rotate the FUNC knob to select the DG-ID setting for
WIRES-X.
AUTO:
Only open nodes, set to the DG-ID number
"00" may be connected.
01 to 99: Only nodes matching the set DG-ID number
may be connected.
The default setting is "AUTO".
3. Press the DIAL knob, SUB DIAL knob or PTT switch to save the setting and return
to normal operation.
30
WIRES-X
64 DELETE ROOM/NODE
TOKYO
1
FISHING
2
3
4
WIRES-X
C1 TOKYO
CQ-JAPAN
JA1YOE-TKY-ROOM
WIRES-X
65
SEARCH SETUP
66
EDIT CATEGORYTAG >
67
DELETE ROOM/NODE >
68
WIRES DG-ID
AUTO
>
>
>
>