Table of Contents
Advertisement
4. Press and hold in the PTT switch, then press the [ F/W ] key once more momentarily
while holding the PTT switch in (this does not key the transmitter).
Whenever you recall a memory which contains indepen-
dently-stored transmit and receive frequencies, the
"
" indication will appear in the display.
1. While operating in the VFO mode, press the [ V/M ( DW ) MT ] key
to enter the Memory mode.
2. Rotate the DIAL knob to select the desired channel.
3. To return to the VFO mode, press the [ V/M ( DW ) MT ] key.
When the radio is already set to the Memory mode, an easy way to recall memories is to
key in the memory channel number, then press the [ V/M ( DW ) MT ] key.
For example, to recall memory channel #14, press [ 1 ]
You may also recall Memory Channel #000 and Programmable Memory channels ("L01/
U01" through "L50/U50") using the following numbers: Memory Channel #000 = "1000,"
Programmable Memory channels #L1 = "1001," U1 = "1002," L50 = "1099," and U50 =
"1100." In these case, you do not need to press the [ V/M ( DW ) MT ] key.
You may wish to append an alpha-numeric "Tag" (label) to a memory or memories, to aid
in recollection of the channel's use (such as a club name, etc.). This is easily accomplished
using the Set Mode.
1. Recall the memory channel on which you wish to append a label.
2. Press the [ F/W ] key, then press the [ 0 ( SET )] key to enter the Set
mode.
3. Rotate the DIAL knob to select Set Mode Item 40: NM SET.
4. Press the [ 0 ( SET )] key momentarily to enable programming of
the name tag.
5. Rotate the DIAL knob to select the first digit of the desired label.
6. Press the [ MODE ( SP S ) SQ TYP ] key to move to the next char-
acter.
7. If you make a mistake, press the [ BAND ( SCN ) BND DN ] key to
back-space the cursor, then re-enter the correct letter, number, or
symbol.
8. Repeat steps 5 through 7 to program the remaining letters, numbers, or symbols of the
VX-6R O
M
M
M
M
L
M
R
S
R
[ 4 ]
M
M
C
[ V/M ( DW ) MT ] .
35
Advertisement
Table of Contents
