Split Tone Operation - Yaesu FT-7800R Operating Manual

The FT-7800R can be operated in a Split Tone configuration via the Set mode.
1. Press and hold in the [ BAND ( SET )] key for 1/2 second to enter the Set mode.
2. Rotate the DIAL knob to select Menu #41 (SPLIT).
3. Press the [ BAND ( SET )] key momentarily, then rotate
the DIAL knob to select "ON" (to enable the Split Tone
feature).
4. Press the [ BAND ( SET )] key momentarily to save the
new setting, then press and hold in the [ BAND ( SET )]
key for 1/2 second to exit to normal operation.
When the Split Tone feature is activated, you can see the following additional parameters
after the "DCS" parameter while selecting the Tone Mode by pressing the [ TONE ( REV )]
key:
DCS Encode only
D:
(the "DCS" icon will blink during operation)
ENC DCS: Encodes a CTCSS Tone and Decodes a DCS code
(the "DCS" and "ENC" icons will appear during operation)
D-DEC: Encodes a DCS code and Decodes a CTCSS Tone
(the "DCS" icon will blink and the "DEC" icon will appear during opera-
tion)
Select the desired operating mode, from the selections shown above.
FT-7800R O
CTCSS/DCS O
S T
PLIT ONE
M
O
PERATION
PERATION
31