Yaesu FT-7800R Operating Manual page 51

Activating the Smart Search
1. Set the radio to the VFO mode by pressing the [ V/M ( MW )] key, if necessary.
2. Press the [ S.SCH ( ARTS )] key momentarily to begin the Smart Search scanning.
3. As active channels are detected, you will observe the number of "loaded" channels in-
creasing in the regular memory channel window.
4. Depending on the mode you set for Smart Search opera-
tion ("SINGLE" or "CONT"), the Smart Search scan
will eventually terminate, and the LCD will revert to
Smart Search Memory Channel "C."
5. To recall the Smart Search memories just stored, rotate the DIAL knob or press the
microphone's [ UP ] / [ DWN ] keys.
6. If you find particular channels which you wish to store into "regular" memory channels,
follow the memory storage procedures described on page 32.
7. To return to normal operation, just press the [ V/M ( MW )] key.
The Smart Search memories are so-called "soft" memories; they will lost if you
exit the Smart Search mode or initiate a new Smart Search sweep.
FT-7800R O M
S S
MART EARCH
49