Table of Contents
Advertisement
Split Tone Operation
The FTM-3207DR/DE can be configured to operate in a "Split Tone" system via the Setup
menu, to facilitate operation on repeaters using a mix of both CTCSS and DCS control.
1. Press and hold in the [ MHz ( SETUP )] key for
one second to enter the Set mode.
2. Rotate the DIAL knob to select "SQL EXP
39".
3. Press the [ MHz ( SETUP )] key, then rotate
the DIAL knob to select "ON".
Default: OFF
4. Press the [ MHz ( SETUP )] key momentarily,
then rotate the DIAL knob to select "SQL
TYPE 40".
5. Press the [ MHz ( SETUP )] key, and then ro-
tate the DIAL knob to select the following
parameters.
D CODE: DCS Encode only (the "DCS" icon
will blink during operation)
T DCS:
Encodes a CTCSS Tone and
Decodes a DCS code (the "T"
icon will blink and the "DCS" icon
will appear during operation)
D TONE: Encodes
Decodes a CTCSS Tone (the "T
SQ" icon will appear and "DCS"
icons will blink during operation)
FTM-3207DR/DE Advance Manual
a
DCS
code
and
Advanced Operation
VOL
SQL
REV
D/A
M H z
V / M
TXPO
D W
M W
SETUP
DIAL
5
Advertisement
Table of Contents
