Memory Bank Scan; Weather Alert Scan - Yaesu FT-7800R Operating Manual

S
CANNING

Memory Bank Scan

When the Memory Bank feature is engaged, the scanner sweeps only memory channels in
the current Memory Bank. However, if the Memory Bank Link Scan feature is enabled, you
may sweep the memory channels in several Memory Banks which you have selected.
To enable the Memory Bank Link Scan feature:
1. Set the radio to the Memory mode by pressing the [ V/M ( MW )] key, if necessary.
2. Press and hold in the [ SCAN ( SEL )] key for 1/2 sec-
ond, then rotate the DIAL knob to select the first Memory
Bank ("BANK 1" ~ "BANK20") you wish to sweep us-
ing Memory Bank Link Scan.
3. Press the [ SCAN ( SEL ) key momentarily. The current
Memory Bank will now be swept during Memory Bank
Scan. A "decimal point" will be appended on the Memory Bank number indication.
4. Repeat steps 2 and 3 above, to append the "decimal point" to any other Memory Banks
you wish to sweep.
5. Now, press and hold in the [ SCAN ( SEL ) key for 1/2 second to initiate scanning.
6. To remove a Memory Bank from the Memory Bank Link Scan, repeat step 2 and 3
above, to delete the "decimal point" from the Memory Bank number indication.

Weather Alert Scan

This feature allows you to check a Weather Broadcast Memory Channel while operating on
a VFO scan or Memory channel scan.
When the Weather Alert Scan feature is engaged, the FT-7800R will check the Weather
Broadcast Memory Channels for activity every five seconds while operating on a VFO scan
or Memory channel scan.
To enable the Weather Alert Scan feature:
1. Press and hold in the [ BAND ( SET )] key for 1/2 second to enter the Set mode.
2. Rotate the DIAL knob to select Menu #48 (WX ALT).
3. Press the [ BAND ( SET )] key momentarily, then rotate
the DIAL knob to "ALT.ON" (to enabling the Weather
Alert Scan feature).
4. Press the [ BAND ( SET )] key momentarily to save the
new setting, then press and hold in the [ BAND ( SET )]
key for 1/2 second to exit to normal operation.
5. To disable the Weather Alert Scan feature, select "ALT.OFF" in step 3 above.
When the Weather Alert Scan feature is engaged, the Scan-Resume mode is fixed
to "TIME."
44
M S
EMORY CANNING
FT-7800R O M