Split Tone Operation - Yaesu FTM-3100R Advanced Manual

Split Tone Operation

The FTM-3100R can be configured to operate in a "Split Tone" system via the Setup
menu, to facilitate operation on repeaters using a mix of both CTCSS and DCS control.
1. Press and hold in the [ MHz ( SETUP )] key for
one second to enter the Set mode.
2. Rotate the DIAL knob to select "SQL EXP
33".
3. Press the [ MHz ( SETUP )] key, then rotate
the DIAL knob to select "ON".
Default: OFF
4. Press the [ MHz ( SETUP )] key momentarily,
then rotate the DIAL knob to select "SQL
TYPE 34".
5. Press the [ MHz ( SETUP )] key, and then ro-
tate the DIAL knob to select the following
parameters.
D CODE: DCS Encode only (the "DCS" icon
will blink during operation)
T DCS: Encodes a CTCSS Tone and
Decodes a DCS code (the "T"
icon will blink and the "DCS" icon
will appear during operation)
D TONE: Encodes
Decodes a CTCSS Tone (the "T
SQ" icon will appear and "DCS"
icons will blink during operation)
FTM-3100R Advance Manual
a DCS code and
Advanced Operation
VOL
REV M H z V / M
SQL TXPO
D W SETUP M W
DIAL
5