Yaesu FT-7800R Operating Manual page 63

P
ROGRAMMING THE
Press and hold the [ LOW ( ACC )] key
Function
Recall the Weather Broadcast Channels.
< WX >
Reverses the transmit and receive frequencies during split-frequency op-
< REV >
eration.
Selects Repeater Shift direction.
< RPTR >
Disable the noise squelch action, allowing you to hear very weak signals
< SQ.OF >
near the background noise level.
Selects the Key locking schemes. ( Short-cut to Menu #21: LOCK )
< LOCK >
Sets the display Brightness.
< DIM >
For Menu #28 PRG P1 PRG ACC , #29 PRG P2 PRG P , #30 PRG P3 PRG P1 , #31 PRG P4 PRG P2
Function Press the button
Disable the noise squelch action, al-
< SQ.OF >
lowing you to hear very weak signals
near the background noise level.
Activates 1750 Hz Tone Burst.
< TCAL >
Activate the Smart Search operation.
< SSCH >
Activate the ARTS
< ARTS >
Select the CTCSS Tone Frequency.
< TN.FQ >
( Short-cut to Menu #44: TN FRQ )
Select the DCS code.
< DCSC>
( Short-cut to Menu #9: DCS.COD )
Recall the Weather Broadcast Chan-
< WX >
nels.
Selects Repeater Shift direction.
< RPTR >
Activates the Priority Channel Scan-
< PRI >
ning (Dual Watch).
Selects the transmit power output
< LOW >
level.
Activates the CTCSS or DCS opera-
< TONE >
tion.
Allows tuning in 1-MHz step on the
< MHz >
VFO frequency.
Reverses the transmit and receive
< REV >
frequencies during split-frequency
operation.
Recall the Home Channel.
< HOME >
Switches operating band.
< BAND >
Switches frequency control among
< V/M >
the VFO, Memory System, and
Home channel.
Activate the Scanner.
< SCAN >
FT-7800R O
M
ISCELLANEOUS
K
For Menu #27 PRG PNL
operation.
M
A
EY SSIGNMENTS
Press and hold the button
Disable the noise squelch action, al-
lowing you to hear very weak signals
near the background noise level.
Activates 1750 Hz Tone Burst.
Activate the ARTS
–
–
–
–
Selects Repeater Shift direction.
–
Recall the Weather Broadcast Chan-
nels.
Reverses the transmit and receive
frequencies during split-frequency
(repeater) operation.
Activates the Priority Channel Scan-
ning (Dual Watch).
Selects Repeater Shift direction.
Switch the Memory Channel display
between the "Frequency" format and
"Alpha-numeric Tag" format.
Enter the Set ("Menu") mode.
Transfer the VFO contents into a
Memory register.
Select the scan mode.
S
ETTINGS
operation.
61