Xerox Phaser 6180 User Manual page 97

Item Description
Protocol Set Enable when using the protocol. When Disable is selected, the protocol
cannot be activated.
LPR (default: Enable)
■
Port 9100 (default: Enable)
■
IPP (default: Enable)
■
SMB TCP/IP
■
SMB NetBEUI
■
FTP (default: Enable)
■
NetWare(default: Enable)
■
SNMP (default: Enable)
■
Email Alerts (default: Enable)
■
CentreWare IS (default: Enable)
■
Bonjour (mDNS) (default: Enable)
■
HTTP-SSL/TLS (default: Enable)
■
IPP, NetWare, and HTTP-SSL/TLS are displayed only when the optional multi
protocol card is installed.
Host Access List Specifies blocking the reception of data from certain IP addresses.
No. n (n: 1 to 5) You can set up to five IP addresses (No. 1 to No. 5). No. 1 has priority over the
others. To set multiple filters, set IP address in descending order from the
address network with the narrowest range.
Address
■
Sets the IP address for No. n. You can set values between 0 and 255.
Mask
■
Sets the mask for No. n. You can set values between 0 and 255.
Mode
■
Specifies the mode to limits for the registered IP address from Off (default),
Accept, or Reject.
The IP filter setting can be set on the CentreWare Internet Services. For details,
refer to
Reset Defaults Initializes network data stored in NVM. The NVM is a nonvolatile memory that
stores the printer settings even after power off. Initializing the NVM will revert the
value for each item of the Wired Network menu to default.
Checking/Managing the Printer with CentreWare IS
Phaser® 6180 Color Laser Printer
5-9
Description of Menu Items
on page 8-5.