Description Of Menu Items; Tray Settings - Xerox Phaser 6180 User Manual

Description of Menu Items

This section includes:
■

Tray Settings

on page 5-4
■ Information Pages on page 5-6
Billing Meters on page 5-7
■
■ Admin Menu on page 5-7
Tray Settings
There are three submenus under the Tray Settings menu: Tray 1 (MPT), Tray 2, and Tray 3.
You can set paper size and paper type for each tray under these menus. (Display Pop-up and
MPT Mode can only be set for Tray 1 (MPT).)
Tray 3 is displayed only when the optional sheet feeder is installed.
The settings menu for Tray 1 (MPT) is displayed only when the MPT Mode is set to Panel
Specified.
Common Settings for Tray 1 (MPT), Tray 2, and Tray 3
Item Description
Paper Type Specifies the type of paper loaded in each tray.
Tray 1 (MPT) (default: Thin Card Stock)
■
Tray 2 (default: Plain)
■
Tray 3 (default: Plain)
■
For details, refer to
Paper Size Specify the paper size and orientation for each tray.
Tray 1 (MPT) (default:Driver Size)
■
Tray 2 (default: Auto)
■
Tray 3 (default: Auto)
■
For details, refer to
Setting Paper Types and Sizes
Setting Paper Types
Phaser® 6180 Color Laser Printer
5-4
Description of Menu Items
on page 4-7.
on page 4-7.