Messages About The Printer And Other Items - Xerox Phaser 6180 User Manual

Message
Ready to Print
Transfer Unit
Replace Soon
Reboot Printer
NNN-NNN
Replace XXX
Print Cartridge
Replace
Transfer Unit
XXX indicates one of the following: the Yellow Toner (Y), Cyan Toner (C), Magenta Toner (M),
Black Toner (K), or fuser.
NNN indicates a numeric value.

Messages About the Printer and Other Items

Message
042-700
Over Heat
077-912
Push in Tray 2
Jam at Tray 1
Check Tray 1
Open Door A
Door A Open
Close Door A
Invalid Feature
Press Set
Invalid Job
Press Set
Condition/Reason/Action
It is nearly time to replace the transfer unit.
Purchase a new transfer unit.
The fuser is not installed correctly or is not working correctly due
to damage or malfunction.
Reinstall the fuser.
The print cartridge has become empty.
Replace the old print cartridge with a new one.
Time to replace the transfer unit.
Replace the old transfer unit with a new one.
Condition/Reason/Action
The printer's internal temperature is too high.
The printer has been stopped. Wait 1 hour before restarting the
printer. Ensure the printer has adequate cooling space around it,
and that the cooling vents are not blocked.
Tray 2 is pulled out. Push Tray 2 into the correct position.
Paper is jammed inside Tray 1 (MPT).
Remove the jammed paper. Open and close the front cover. See
Paper Jams on page 7-2.
The front cover is open.
Close the front cover.
The user is not registered to print in color when using an
authentication function.
Contact your administrator.
When the configuration of the printer on the print driver does not
conform to the printer you are using, this message appears.
Press the Cancel button to cancel the print job.
Make sure that the configuration of the printer on the print driver
conforms to the printer you are using.
Phaser® 6180 Color Laser Printer
7-22
Control Panel Error Messages