Dynamic Methods Of Setting The Printer's Ip Address - Xerox Phaser 6180 User Manual

Color laser printer
Hide thumbs Also See for Phaser 6180:
Table of Contents

Advertisement

Dynamic Methods of Setting the Printer's IP Address

There are two protocols available for dynamically setting the printer's IP address:
DHCP (enabled by default on all Phaser printers)
AutoIP
You can turn on/off both protocols using the control panel, or use CentreWare IS to turn on/off
DHCP.
Note:
You can view the printer's IP address at any time. On the control panel, select
, press the OK button, select
Information
OK button.
Using the Control Panel
To turn on/off either the DHCP or AutoIP protocol:
1.
On the control panel, select the
2.
Select the
menu, and then press the OK button.
Admin
3.
Select the
Network Setup
4.
Select the
menu, and then press the OK button.
TCP/IP
5.
Select
Get IP Address
Using CentreWare IS
To turn on/off the DHCP protocol:
1.
Launch your web browser.
2.
Enter the printer's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx).
3.
Select Properties.
4.
Select the Protocols folder on the left navigation panel.
5.
Select TCP/IP.
6.
In the Get IP Address field, select the DHCP/Autonet option.
7.
Click the Save Changes button.
Printer Identification
button, and then press the OK button.
Menu
menu, and then press the OK button.
, and then press the OK button.
Phaser® 6180 Color Laser Printer
3-6
Configuring the Network Address
, and then press the

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

6180n - phaser color laser printer

Table of Contents