Table of Contents
Advertisement
6.
Tie down the machine near the front caster
wheels and the rear frame with straps, chains,
cable, or ropes. Refer to local regulations for
tie-down requirements.
Figure 51
1. Tie-down points
Unloading the Machine
1.
Lower the ramp, ensuring that the angle
between the ramp and the ground does not
exceed 15 degrees
2.
Drive the machine forward down the ramp
(Figure
50).
Transporting the
Lithium-Ion Batteries
The US Department of Transportation and
international transportation authorities require that
lithium-ion batteries be transported using special
packaging and only be transported by carriers certified
to haul them. In the US, you are allowed to transport
a battery when it is installed on the machine as
battery powered equipment, with some regulatory
requirements. Contact the US Department of
Transportation or the appropriate government body in
your country for detailed regulations on transportation
of your batteries or the machine with the batteries
equipped.
For detailed information on shipping a battery, contact
your Authorized Service Dealer.
(Figure
49).
Using the Lithium-Ion
Battery Charger
Refer to
Figure 52
battery-charger cords.
g398114
1. Power-supply cord
35
for an overview of the
Figure 52
2. Output connector and cord
g355440
Advertisement
Table of Contents
