Table of Contents
Advertisement
•
Smaller grass clippings
•
Propels grass clippings farther away from the
mower
Figure 40
Position B
Use this position when bagging.
Figure 41
Position C
This is the fully-forward position. The suggested use
for this position is as follows:
•
Tall, dense grass mowing conditions
•
Wet conditions
•
Lowers the power consumption
•
Allows increased ground speed in heavy conditions
Figure 42
Adjusting the Rake of the
Mower Deck
Adjusting the rake of the mower deck can improve
the machine run time. You can raise the rear of the
mower deck in 6.3 mm (1/4 inch) increments, up to
25.4 mm (1 inch).
1.
Park the machine on a level surface, disengage
the PTO, and move the motion-control levers
outward to the P
2.
Shut off the machine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
g402027
3.
Raise the mower deck to the Transport position.
4.
Loosen the jam nut.
5.
Turn the bolt to move the adjustment yoke until
the edge aligns with the desired slope on the
decal.
6.
Tighten the jam nut.
g402028
1. Bolt
2. Jam nut
g402026
30
position.
ARK
Figure 43
3. Adjustment yoke
g399475
Advertisement
Table of Contents
