Table of Contents
Advertisement
5.
Back the machine up the ramp.
Figure 38
1. Back the machine up the
ramp.
6.
Shut off the machine and remove the key.
7.
Tie down the machine near the front caster
wheels, or front frame holes, and the rear
bumper holes with straps, chains, cable, or
ropes
(Figure
39). Refer to local regulations for
tie-down requirements.
Figure 39
g031405
2. Walk the machine down
the ramp.
g407500
Transporting the
Lithium-Ion Batteries
The US Department of Transportation and
international transportation authorities require that
lithium-ion batteries be transported using special
packaging and only be transported by carriers certified
to haul them. In the US, you are allowed to transport
a battery when it is installed on the machine as
battery powered equipment, with some regulatory
requirements. Contact the US Department of
Transportation or the appropriate government body in
your country for detailed regulations on transportation
of your batteries or the machine with the batteries
equipped.
For detailed information on shipping a battery, contact
your Authorized Service Dealer.
Using the Lithium-Ion
Battery Charger
Refer to
Figure 40
battery-charger cords.
1. Power-supply cord
27
for an overview of the
Figure 40
2. Output connector and cord
g355440
Advertisement
Table of Contents
