Hyundai ix20 Owner's Manual page 382

Hide thumbs Also See for ix20:

Table of Contents

3. Check the removed fuse; replace it if it

is blown. To remove or insert the fuse,

use the fuse puller in the engine com-

partment fuse panel.

4. Push in a new fuse of the same rating,

and make sure it fits tightly in the clips.

If it fits loosely, we recommend that

you consult a HYUNDAI authorised

After checking the fuse panel in the

compartment,

install the fuse panel cover. If not,

electrical failures may occur from

water leaking in.

If the main fuse is blown, it must be

removed as follows:

1. Disconnect the negative battery cable.

2. Remove the nuts shown in the picture

3. Replace the fuse with a new one of the

same rating.

4. Reinstall in the reverse order of

If the main fuse is blown, we recom-

mend that you consult a HYUNDAI

authorised repairer.