Table of Contents
Advertisement
What to do in an emergency
- To reduce the inflation pres-
sure: Press the button 8 on the
compressor.
CAUTION
If the inflation pressure is not
maintained, drive the vehicle a
second time, refer to Distributing
the sealant. Then repeat steps 1
to 4.
Use of the Tyre Mobility Kit may
be ineffectual for tyre damage
larger than approximately 4 mm
(0.16 in).
We recommend that you contact
the nearest HYUNDAI A/S cen-
tre, or a workshop that works
according to HYUNDAI repair
procedures with corresponding-
ly trained personnel if the tyre
cannot be made roadworthy
with the Tyre Mobility Kit.
WARNING
The tyre inflation pressure must
be at least 200 kPa (29 psi). If it is
not, do not continue driving. Call
for road side service or towing.
6
28
Notes on the safe use of the Tyre
Mobility Kit
• Park your car at the side of the
road so that you can work with the
Tyre Mobility Kit away from moving
traffic. Place your warning triangle
in a prominent place to make pass-
ing vehicles aware of your location.
• To be sure your vehicle won't
move, even when you're on fairly
level ground, always set your park-
ing brake.
• Only use the Tyre Mobility Kit for
sealing/inflation passenger car
tyres. Do not use on motorcycles,
bicycles or any other type of tyres.
• Do not remove any foreign objects-
such as nails or screws -that have
penetrated the tyre.
• Before using the Tyre Mobility Kit,
read the precautionary advice
printed on the sealant bottle!
• Provided the car is outdoors, leave
the engine running. Otherwise
operating the compressor may
eventually drain the car battery.
• Never leave the Tyre Mobility Kit
unattended whilst it is being used.
• Do not leave the compressor run-
ning for more than 10 min. at a time
or it may overheat.
• Do not use the Tyre Mobility Kit if
the ambient temperature is below -
30°C (-22°F).
• Do not use the sealing compound
after its expiration date which can
be found on the label of the bottle.
• Keep away from children.
❈ Sealing compound and spare
parts
can
be
obtained
replaced at an authorized vehicle
or tyre dealer. Empty sealing com-
pound bottles may be disposed of
at home. Liquid residue from the
sealing compound should be dis-
posed of by your vehicle or tyre
dealer or in accordance with local
waste disposal regulations.
and
Advertisement
Table of Contents
