Engine Oil - Hyundai ix20 Owner's Manual

ENGINE OIL

Checking the engine oil level
(Petrol engine)
1. Be sure the vehicle is on level ground.
2. Start the engine and allow it to reach
normal operating temperature.
3. Turn the engine off and wait for a few
minutes (about 5 minutes) for the oil to
return to the oil pan.
4. Pull the dipstick out, wipe it clean, and
reinsert it fully.
WARNING -
Radiator hose
Be very careful not to touch the
radiator hose when checking or
adding the engine oil as it may be
hot enough to burn you.
5. Pull the dipstick out again and check
the level. The level should be between
F (Full) and L (Low).
OYN076003
Maintenance
If it is near or at L (Low), add enough oil
to bring the level to F (Full). Do not over-
fill.
Use a funnel to help prevent oil from
being spilled on engine components.
Use only the specified engine oil. (Refer
to "Recommended lubricants and capac-
ities" in section 8.)
CAUTION
Do not overfill the engine oil. It may
damage the engine.
OYN079004
7 11