Table of Contents
Advertisement
Driving your vehicle
Shift-lock release
If the shift lever cannot be moved from
the P (Park) position into R (Reverse)
position with the brake pedal depressed,
continue depressing the brake, and then
do the following:
5
26
1. Place the ignition switch in the
LOCK/OFF position.
2. Apply the parking brake.
3. Carefully remove the cap (1) covering
the shift-lock access hole.
4. Insert a screwdriver into the access hole
and press down on the screwdriver.
5. Move the shift lever whilst holding
down the screwdriver.
6. Remove the screwdriver from the shift-
lock access hole then install the cap.
7. Depress the brake pedal, and then
restart the engine.
If you need to use the shift-lock release,
we recommend that the system be
inspected by a HYUNDAI authorised
repairer immediately.
Good driving practices
• Never move the shift lever from P
(Park) or N (Neutral) to any other posi-
tion
with
depressed.
• Never move the shift lever into P (Park)
when the vehicle is in motion.
• Be sure the vehicle is completely
stopped before you attempt to shift into
R (Reverse) or D (Drive).
• Never take the vehicle out of gear and
coast down a hill. This may be
OJC045185R
extremely hazardous. Always leave the
vehicle in gear when moving.
• Do not "ride" the brakes. This can
cause them to overheat and malfunc-
tion. Instead, when you are driving
down a long hill, slow down and shift to
a lower gear. When you do this, engine
braking will help slow down the vehicle.
the
accelerator
pedal
Advertisement
Table of Contents
