Cruise Control System (If Equipped) - Hyundai ix20 Owner's Manual

Hide thumbs Also See for ix20:
Table of Contents

Advertisement

Driving your vehicle

CRUISE CONTROL SYSTEM (IF EQUIPPED)

The cruise control system allows you to
program the vehicle to maintain a con-
stant speed without depressing the
accelerator pedal.
This system is designed to function
above approximately 25 mph (40 km/h).
5
38
WARNING
• If the cruise control is left on,
(CRUISE indicator light in the
instrument cluster illuminated)
the
cruise
control
switched on accidentally. Keep
the cruise control system off
(CRUISE indicator light OFF)
when the cruise control is not in
use, to avoid inadvertently set-
ting a speed.
• Use the cruise control system
only when driving on open high-
ways in good weather.
• Do not use the cruise control
when it may not be safe to keep
the vehicle at a constant speed,
for instance, driving in heavy or
varying traffic, or on slippery
(rainy, icy or snow-covered) or
winding roads or over 6% up-hill
or down-hill roads.
• Pay particular attention to the
driving
conditions
whenever
using the cruise control system.
CAUTION
During cruise-speed driving with a
manual transaxle vehicle, do not
shift into neutral without depress-
ing the clutch pedal, since the
can
be
engine will be overrevved. If this
happens, depress the clutch pedal
or release the cruise control ON-
OFF switch.
✽ ✽ NOTICE
• During normal cruise control opera-
tion, when the SET switch is activated
or reactivated after applying the
brakes, the cruise control will ener-
gize after approximately 3 seconds.
This delay is normal.
• To activate cruise control, depress the
brake pedal at least once after turning
the ignition switch to the ON position
or starting the engine. This is to check
if the brake switch which is important
part to cancel cruise control is in nor-
mal condition.

Advertisement

Table of Contents
loading

Table of Contents