Table of Contents
Advertisement
Features of your vehicle
VOICE COMMAND
(if equipped)
Starting Voice Command
• To start voice command, shortly press
the
key on the steering wheel
remote controller.
• If voice command is in [Normal Mode],
then the system will say "Please say a
command. Beep"
❈ If voice command is in [Expert Mode],
then the system will only say a "Beep-"
❈ Setting Voice command [Normal
Mode]/[Expert Mode]:
Press the
key
[System] through the
or
4
key
Select [VRS Mode]
through the
TUNE knob
[Normal Mode] /[Expert Mode]
• Say the voice command.
✽ ✽ NOTICE
For proper voice recognition, say the
voice command after the guidance mes-
sage and the "Beep" sound.
4
148
Skipping the Guidance Message
Whilst the guidance message is being
stated, shortly press the
0.8 seconds) to discontinue the guidance
message and sound the "beep".
After the "beep", say the voice command.
Select
TUNE knob
Set
Ending Voice Command
• Whilst using voice command, press and
key (under
hold the
end voice command.
• Whilst using voice command, pressing
the steering wheel remote controller or
a different key will end voice command.
• In a state where the system is waiting
for your voice command, say "cancel" or
"end" to end voice command.
• In a state where the system is waiting
for your voice command, shortly press
the
key (under 0.8 seconds) to end
voice command.
key (over 0.8 seconds) to
Advertisement
Table of Contents
