Configuring Scan File Certificates With Centreware Internet Services - Xerox WorkCentre 7228 System Administrator Manual

Configuring Scan File certificates with CentreWare Internet Services

To configure certificates with CentreWare Internet Services, first enable HTTP communications (as stated
under Configuration of HTTP Communication Encryption in this section). Next, import a certificate
from a Certificate Authority (in PKCS12 format). Finally, set the certificate as a scan file certificate.
1. Start a web browser.
2. Enter the machine's IP address, beginning with "https," into the Address box of your web browser,
and press the Enter key.
Example:
https://192.168.1.1/
3. Click the Properties tab.
4. Click [+] on the left of PKI Settings (Public Key) to display the items in the folder.
5. Click Certificate Management. Note: To see this hot link, at least one certificate must have been
created and stored on the machine. To create a self-signed certificate, if necessary, follow the
instructions for Configuration of HTTP Communication Encryption.
6. Import a certificate.
Important • When importing a certificate, if the same certificate has been already registered in [Local
Device] or [Others], the certificate cannot be imported. Delete the existing certificate before importing
the new one.
a. Enter the Password.
b. Enter the Re-enter Password.
c. Enter a file name for the file you want to import, or select the file to be imported by clicking the
Browse button.
d. Click the Import button. When a screen to enter the user name and password appears, enter the
System Administrator user ID and password into User Name and Password, and then click OK.
Note: The default user ID is "11111" and the default password is "x-admin".
7. Refresh the web browser.
8. Click [+] on the left of PKI Settings (Public Key) to display the items in the folder.
218