Xerox WorkCentre 7228 System Administrator Manual page 72

Add the Printer to the Windows 95/98/Me Desktop
1. From the Start menu, select Settings and then Printers.
2. Double click the Add Printer button and click Next.
3. When the Add Printer Wizard displays, select Network Printer.
4. Select Browse to search for the printer's Workgroup over the Microsoft network.
5. Select the plus symbol (+) to the left of Entire Network to expand it if necessary.
6. Double click the name of the Workgroup for the device as shown on the Settings List. Select the
SMB Host Name as shown on the Settings List. Click OK, then click Next.
7. When the Manufacturers and Printers window displays, select Have Disk... and enter in the path to
your driver files. Note that you can also use the Browse button to locate the required .INF file.
8. Click OK on the "Open" screen, if you used the Browse button.
9. Click OK on the "Install From Disk" screen.
10. When the "Printers" list is displayed on screen, select your Printer. Click Next.
11. When prompted, accept the default printer name, or give your printer a more descriptive name.
Select either Yes or No to make this printer your default Windows printer. Choose Yes if you will be
printing primarily to this printer from your Windows applications. Click Next.
12. Print a Test Page. Verify that it prints at the Device.
13. Click Finish.
Configure the Print Driver in Windows 95/98/Me
1. From the Start menu, select Settings and then Printers.
2. Right click on the Printer's icon and select Properties.
3. Select the correct paper size and any other default settings (such as enabling Bi-Directional
Communication) that you wish to set for the printer.
72