Scanning Requirements; Server Requirements; Protocols And Transports - Xerox Document Centre 220 Getting Started

S U I
ETTING P NTERNET
Setting Up for Scanning
S R
CANNING EQUIREMENTS
To set up your Document Centre for network scanning, certain server and
connectivity requirements are necessary. Make sure you check the following
server requirements and protocols/transport information before proceeding with
the Scanning Setup.
S R
ERVER EQUIREMENTS
The requirements for the scan server will vary depending on the number of users.
Some basic requirements include:
• Available disk space for repositories or template pools, plus sufficient space
for scanned document images.
• NetWare Bindery or NDS network operating system, or workstations/servers
with an FTP server running.
P
ROTOCOLS AND
The Document Centre filing service makes a connection to the file servers in one
of two ways:
• NCP over IPX/SPX. NCP (NetWare Core Protocol) is used for all filing
connections to NetWare servers and runs over the IPX/SPX transport.
• FTP over TCP/IP. FTP server software exists for a variety of operating
systems; therefore, FTP running over the TCP/IP transport is used for all filing
connections to non-NetWare servers.
2-6
S
ERVICES
T
RANSPORTS
G S I
ETTING TARTED WITH NTERNET
S
ERVICES