Connectivity Properties - Xerox Document Centre 220 Getting Started

U I S
SING NTERNET ERVICES
What You Can Do with Internet Services
C
ONNECTIVITY
Connectivity is the network configuration of the Document Centre, which
includes Interfaces and Protocols. Internet Services provides added options to
indicate if the selected protocol (NetWare or TCP/IP) is either active or idle and
the ability to change the NetWare SAP rate; options that are not available at the
Document Centre control panel.
N :
See the Xerox Document Centre 220/230/332/340 ST or 230 LP System
OTE
Administration Guide for more information on setting up the Document Centre.
Interfaces
À
To modify the Port Configurations for your Document Centre interface:
1. Click Connectivity.
2. Click Interfaces.
3. Click Ethernet, Parallel, or Token Ring and modify the settings, such as
TimeOut.
4. Click Apply New Settings, then power off/on the Document Centre to affect
the changes.
3-10
P
ROPERTIES
G S I
ETTING TARTED WITH NTERNET
S
ERVICES