Printing And Managing Print Jobs - Xerox DocuColor 5750 Administrator's Manual

3
3-32 Setting up Network Servers
4. To verify the TCP/IP connection, ping the IP address or the host name. From any com-
puter on the network, at the command prompt, type:
ping <IP address>
Type the DocuColor IP address assigned in DocuColor Network Setup.
After the DocuColor is set up as a network printer, you can also ping the name you
gave to the DocuColor
ping <hostname>
The server should respond with a message such as
<IP address> is alive
Some systems will respond with a continuous display of output from the IP address. To
stop the output, type

Printing and managing print jobs

UNIX printing commands and options are detailed in the manual pages for your sys-
tem. Some examples are given in the DocuColor User Guide.
T D C
O PRINT TO THE OCU OLOR
• On a UNIX system running SunOS 4 or other BSD-based variant, use the lpr command
to send a job to the DocuColor.
• On a UNIX system running Solaris 2 or any System V implementation of UNIX, use the
lp command to send a job to the DocuColor.
• Windows NT users with the TCP/IP protocol loaded can send print jobs to a DocuColor
from their applications or from a command prompt.
Printing from applications uses the Windows NT PostScript driver. This gives
Windows NT users a larger selection of print options than printing from the com-
mand line.
Control-C. You can use the
:
ping command at any time.