Setting Up Token Ring On The Docucolor; Setting Up Netware Windows Clients - Xerox DocuColor 5750 Administrator's Manual

A
A-4 Token Ring Network Option

Setting up Token Ring on the DocuColor

Token Ring Setup on the Control Panel is similar to Ethernet Setup. From Network
Setup, perform Port Setup, Protocol Setup, and Service Setup. The setups you need are
summarized in the table on page 2-9.
Connect the Token Ring cable before doing DocuColor Network Setup, so that
N :
OTE
the Token Ring card can configure itself for the correct cable.

Setting up NetWare Windows clients

Client setup is exactly the same as for IPX clients using Ethernet. See "Setting up
NetWare Windows clients for printing" on page 3-15 for details.