Configuring The Docucolor And Clients For Webtools - Xerox DocuColor 5750 Administrator's Manual

3
3-28 Setting up Network Servers
Install the Windows NT PostScript Printer driver and the DocuColor PPD for your
Windows NT server and for your Windows NT and Windows clients. Mac OS users
can print directly to the DocuColor and should install the AdobePS printer driver for
the Mac OS and the DocuColor PPD. All of these installations are described in Getting
Started.
Configuring the DocuColor and clients for WebTools
The WebTools duplicate many of the functions of the utilities. Because they are
accessed via the Internet (or your company's intranet) and are platform-independent,
they provide additional flexibility in remote management.
T W T
O SET UP EB OOLS ON THE
1. Perform DocuColor Setup and enable TCP/IP.
In Network Setup, choose Protocol Setup and perform TCP/IP Setup and Ethernet
Setup. (Perform Token Ring Setup if the Token Ring option is installed.) Enabling
TCP/IP automatically enables the communication for the WebTools.
2. Set a valid, unique IP Address for the DocuColor, and then set the subnet mask and a
gateway address if necessary.
3. Exit TCP/IP Setup and exit Protocol Setup.
4. Choose Service Setup, and choose Web Services Setup.
5. For Enable Web Services, select Yes.
6. Exit Service Setup and exit Network Setup, and select Yes at the Save Changes screen.
7. In DocuColor Printer Setup, confirm that Publish Print Queue is set to Yes.
8. Exit Printer Setup, and select Yes at the Save Changes screen.
T W T
O SET UP EB OOLS ON A CLIENT WORKSTATION
1. Enable TCP/IP networking.
2. Make sure the workstation has a valid, unique IP address.
D C :
OCU OLOR
: