Xerox 5750 Supplementary Manual
  1. Manuals
  2. Brands
  3. Xerox Manuals
  4. Copier
  5. DocuColor 5750
  6. Supplementary manual
Xerox 5750 Supplementary Manual

Xerox 5750 Supplementary Manual

Xerox 5750: supplementary guide
Hide thumbs Also See for 5750:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Administrator's Manual, Service Manual
Fiery XJ+ 325 Color Server
G E T T I N G S T A R T E D
X e r o x d i g i t a l c o p i e r p r i n t e r s

Advertisement

Table of Contents
loading

Related Manuals for Xerox 5750

Summary of Contents for Xerox 5750

  • Page 1 Fiery XJ+ 325 Color Server G E T T I N G S T A R T E D X e r o x d i g i t a l c o p i e r p r i n t e r s...
  • Page 2 Compression, and Memory Multiplier are trademarks of Electronics for Imaging, Inc. XEROX 5760, 5765, 5790, MajestiK, Regal, and all Xerox product names mentioned in this publication are trademarks of the XEROX CORPORATION. Adobe, the Adobe logo, Adobe Illustrator, PostScript, Adobe Photoshop, Adobe Separator, and Adobe PageMaker are registered trademarks of Adobe Systems Incorporated, registered in certain jurisdictions.
  • Page 3 CE Mark The CE marking applied to this product symbolises Rank Xerox’s declaration of conformity with the following applicable directives of the European Union as of the dates indicated. January 1, 1996—Council Directive 70/80/CCO amended by Council Directive 93/68/EEO. Approximation of the laws of the member states related to low voltage equipment.
  • Page 4 Software License Agreement Electronics for Imaging, Inc. grants to you a non-exclusive, non-transferable license to use the software and accompanying documentation (“Software”) included with the Fiery XJ Color Server you have purchased, including without limitation the PostScript You may: a. use the Software solely for your own customary business purposes and solely with Fiery XJ; b.
  • Page 5 For warranty service, please contact your authorized service/support center. EXCEPT FOR THE ABOVE EXPRESS LIMITED WARRANTY, ELECTRONICS FOR IMAGING MAKES AND YOU RECEIVE NO WARRANTIES OR CONDITIONS ON THE SOFTWARE OR CODED FONT PROGRAMS, EXPRESS, IMPLIED, STATUTORY, OR IN ANY OTHER PROVISION OF THIS AGREEMENT OR COMMUNICATION WITH YOU, AND ELECTRONICS FOR IMAGING SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

  • Page 6: Table Of Contents

    Contents Introduction About the media pack About the documentation System requirements for Macintosh users System requirements for PC users With Windows 3.1x With Windows 95 With Windows NT User software Installing user software on a Macintosh computer Installing Macintosh software Copying files from the Color Files folder Color management files Setting up the Fiery XJ as a PostScript printer...
  • Page 7 vii Table of Contents Setting up the Fiery XJ as a PostScript printer Setting up printing with Windows 3.1x Setting up printing with Windows 95 Setting up printing from Windows NT Fiery WebTools Setting up Fiery WebTools Using the WebTools Installer Using the Printer Driver Installer for Macintosh Troubleshooting On a Macintosh computer...

  • Page 8: About The Media Pack

    Apple information on setting up network servers and clients to use the Fiery XJ, see the Administrator Guide. For general information on using the color copier, your computer, your application software, or your network, see the manuals that accompany those products.

  • Page 9: System Requirements For Macintosh Users

    ix System requirements for Macintosh users System requirements for Macintosh users To print to the Fiery XJ from a Macintosh computer, you need: • Any Macintosh, Quadra ™ , or Power Macintosh model that has at least 4MB of RAM and EtherTalk ®...

  • Page 10: With Windows 3.1X

    x User software With Windows 3.1x • Microsoft Windows version 3.1 or later. • IPX/SPX networking protocol set up. • MS-DOS ® version 5.0 or later. With Windows 95 • Microsoft Windows 95 with IPX/SPX networking protocol set up. With Windows NT •...
  • Page 11 xi User software Fiery XJ Scan ™ A plug-in module for Adobe Photoshop that enables you to scan images from the printer directly into Photoshop. Fiery XJ Export ™ A plug-in module for Adobe Photoshop that enables you to print files from Photoshop very quickly. Fiery XJ Export bypasses the printer driver and internal Fiery XJ processing and does not generate PostScript, decreasing the time required to print the files.
  • Page 12 xii User software CMYK Color Reference Provides a range of CMYK patches in a PostScript format. Enables you to select values for print jobs from the full range of colors that the Fiery XJ can print. RGB Colors for Opens in MS Word or PowerPoint so you can view the MS Word and PowerPoint colors available in the standard palette for that application, and see how the colors print on the Fiery XJ.

  • Page 13: Installing User Software On A Macintosh Computer

    1 Installing Macintosh software The general steps for installing the Fiery XJ user software from the CD and setting up Installing user printing from a Macintosh computer are: software on a Macintosh • Install the plug-ins and utilities. computer • Install the ColorSync •...
  • Page 14 2 Installing user software on a Macintosh computer Before installing the plug-ins, note the hard disk location and version of your Adobe Photoshop software. O INSTALL ACINTOSH PLUG 1. If you are using an external CD-ROM drive, connect it to your Macintosh. 2.
  • Page 15 3 Installing Macintosh software 6. For Photoshop 4.0, browse to the Import/Export folder, located in the Plug-ins folder, and click Install into “Import/Export”. For Photoshop 3.0x, browse to the Acquire/Export folder, located in the Plug-ins folder, and click Install into “Acquire/Export”.
  • Page 16 4 Installing user software on a Macintosh computer For Photoshop 2.5, browse to the Plug-ins folder, and click Install into “Plug-ins”. 7. Double-click the Fiery XJ Scan Installer icon. The installer window displays the Fiery XJ Scan plug-in and the amount of disk space required to install it.
  • Page 17 5 Installing Macintosh software 9. For Photoshop 4.0, browse to the Import/Export folder, located in the Plug-ins folder, and click Install into “Import/Export”. For Photoshop 3.0x, browse to the Acquire/Export folder, located in the Plug-ins folder, and click Install into “Acquire/Export”.
  • Page 18 6 Installing user software on a Macintosh computer For Photoshop 2.5, browse to the Plug-ins folder, and click Install into “Plug-ins”. O INSTALL ACINTOSH UTILITIES 1. If you are using an external CD-ROM drive, connect it to your Macintosh. 2. Insert the User Software CD. 3.
  • Page 19 7 Installing Macintosh software 5. Shift-click to select both items. 6. Click Install. 7. Browse to where you want to install the utilities, and click Install. You can install the utilities anywhere you like; you may want to keep them in the same folder with your other utility software.
  • Page 20 8 Installing user software on a Macintosh computer 4. Double-click the ColorSync™ Profiles Installer icon. The installer window displays ColorSync required to install them. 5. Click Install. 6. If ColorSync is installed on your system, browse to the ColorSync™ Profiles folder, located in the Preferences folder, and click Install into “ColorSync™...

  • Page 21: Copying Files From The Color Files Folder

    9 Copying files from the Color Files folder Copying files from the Color Files folder Copy any additional files from the Color Files folder on the User Software CD to your hard disk. Many of the files are PostScript files you can download and print using the Fiery XJ Downloader or any other application that supports printing PostScript files.

  • Page 22: Color Management Files

    Fiery XJ. They are specific to the Fiery XJ and your printer: • ICC ColorSync Profiles, installed by the software installer. Includes Fiery Xerox 5750 ICC, Fiery Xerox Majestik ICC, and Fiery Xerox Regal ICC, which are three printer profiles specially designed for use with the Fiery XJ, your particular printer model, and the Macintosh color management system;...
  • Page 23 11 Copying files from the Color Files folder • EFICOLOR 2.0 profiles can be copied from the User Software CD. • EFICOLOR Photoshop Separation Table files can be copied from the User Software CD and loaded from Adobe Photoshop. Install the EFICOLOR files only if your system uses the EFICOLOR color management system.
  • Page 24 12 Installing user software on a Macintosh computer 5. Browse to the ColorSync Profiles folder (in the Preferences folder), select the Calibrated RGB file, and click Open. The Calibrated RGB file appears as the selection in the Monitor pop-up menu of the Monitor Setup dialog box.

  • Page 25: Setting Up The Fiery Xj As A Postscript Printer

    13 Setting up the Fiery XJ as a PostScript printer 4. Click Load. 5. Browse to the Adobe Photoshop folder, select the appropriate separation table file, and click Open. Use the <printer model>.P file if you will be printing in Photographic mode. Use the <printer model>.S file if you will be printing in Solid Color mode.

  • Page 26: Setting Up The Fiery Xj In The Chooser

    4. Select the Fiery XJ by name from the list of printers, and click Setup. 5. Select the Fiery XJ PPD that corresponds to your printer, and click Select. For 5750 copiers, select Fiery XJ 5750 v2015.802. For MajestiK copiers, select Fiery XJ MajestiK v2015.802.

  • Page 27: Installing User Software On A Pc-Compatible Computer

    15 Installing Windows software Installing user This chapter describes installing software and setting up printing from a PC-compatible computer running Windows 3.1x, Windows 95, or Windows NT. software on a PC-compatible The general steps for installing the Fiery XJ user software from the CD are: computer •...
  • Page 28 16 Installing Windows software Before installing Fiery XJ Export, note the hard disk location and version of your Adobe Photoshop software. XJ E NSTALL IERY XPORT 1. Insert the User Software CD into your computer. 2. For Windows 3.1x or NT File Manager, double-click the icon for the CD-ROM drive to display its contents.
  • Page 29 17 Installing Windows software 6. Click Browse. 7. For Photoshop 4.0, browse to the Photoshop\Plugins\Export folder, and click OK.
  • Page 30 18 Installing Windows software For Photoshop 3.0x, browse to the Photoshop\Plugins folder, and click OK. For Photoshop 2.5, browse to the Photoshop\Plugins folder, and click OK. 8. Click Next. The Start Copying Files window appears. 9. Verify that the correct information appears in the Current Settings area, and click Next.
  • Page 31 19 Installing Windows software Before installing Fiery XJ Scan, note the hard disk location and version of your Adobe Photoshop software. XJ S NSTALL IERY 1. Insert the User Software CD into your computer. 2. For Windows 3.1x or NT File Manager, double-click the icon for the CD-ROM drive to display its contents.
  • Page 32 20 Installing Windows software 6. Click Browse. 7. For Photoshop 4.0, browse to the Photoshop\Plugins\Import folder, and click OK.
  • Page 33 21 Installing Windows software For Photoshop 3.0x, browse to the Photoshop\Plugins folder, and click OK. For Photoshop 2.5, browse to the Photoshop\Plugins folder, and click OK. 8. Click Next. The Start Copying Files window appears. 9. Verify that the correct information appears in the Current Settings area, and click Next.
  • Page 34 22 Installing Windows software O INSTALL IERY UTILITIES 1. Insert the User Software CD into your computer. 2. For Windows 3.1x or NT File Manager, double-click the icon for the CD-ROM drive to display its contents. For Windows 95, open the My Computer window and double-click the icon for the CD-ROM drive.
  • Page 35 23 Installing Windows software 6. Click Next to install the utilities in the default folder, or click Browse and browse to the desired destination. 7. To install utility icons in the Program Folder, click Next for the default folder. You can also rename the folder or select an existing folder and click Next.
  • Page 36 24 Installing Windows software 8. For Windows 95 and Windows NT only, specify the network type. For Windows 95 choose IPX/SPX; for Windows NT choose TCP/IP. The network type you specify determines which .dll file is installed in the Windows\System folder—Net_wipx.dll for IPX/SPX, or Net_wsck.dll for TCP/IP. If you reinstall the utilities and specify a different network type, both .dll files will reside in the Windows\System folder.
  • Page 37 25 Installing Windows software 9. Verify that the correct information appears in the Current Settings area, and click Next. If the information is not correct, click Back. Information about installation progress appears on the screen as software is copied from the CD. Click Cancel to cancel installation.
  • Page 38 26 Installing Windows software 10. If you have a preconfigured NET_WSCK.INI file for your site, click Browse and browse to the file. If you do not have a preconfigured NET_WSCK.INI file, click Next to install the default file. You are prompted to configure the NET_WSCK.INI file when you first launch one of the Fiery XJ utilities (see “Configuring the NET_WSCK.INI file”...

  • Page 39: Using The Fiery Xj Utilities For The First Time

    27 Using the Fiery XJ utilities for the first time Using the Fiery XJ utilities for the first time In order to use the Fiery XJ utilities, certain files must be moved to specific locations and configured to connect to the Fiery XJ. Windows 3.1x Where to move and how to configure files depends on your network connection.

  • Page 40: Configuring The Net_Wsck.ini File

    28 Configuring the NET_WSCK.INI file Configuring the NET_WSCK.INI file If you installed the default NET_WSCK.INI file included with your Fiery XJ software, you must properly configure this file to be able to use the Fiery XJ utilities with the Fiery XJ. If you are using Windows 3.1x, you must copy this file to the WINDOWS folder of every user.
  • Page 41 4. Click Add. 5. When 5750, 5760/65, or 5790 appears in the Devices area, click OK. The Fiery XJ appears in a Chooser list of available servers. 6. Click OK to begin using the Fiery XJ utility.
  • Page 42 You must enter this information exactly. See the Configuration page for information. The IP Address (for server name) is listed under Network Setup/Ethernet Setup/Enable TCP/IP. In the New Device area: For 5750 copiers, enter For Majestik copiers, enter For Regal copiers, enter 4. Click Add.

  • Page 43: Editing The Net_Wsck.ini File

    31 Configuring the NET_WSCK.INI file 5. When 5750, 5760/65, or 5790 appears in the Devices area, click OK. The Fiery XJ appears in a Chooser list of available servers. 6. Click OK to begin using the Fiery XJ utility. Editing the NET_WSCK.INI file You should edit the NET_WSCK.INI file whenever there is any information change...

  • Page 44: Copying Files From The Clrfiles Folder

    32 Copying files from the Clrfiles folder Copying files from the Clrfiles folder Copy the additional files that you want from the Clrfiles folder on the User Software CD to your hard disk. Many of the files are PostScript files that you can download and print using the Fiery XJ Downloader or any other application that supports printing PostScript files.

  • Page 45: Color Management Files

    33 Copying files from the Clrfiles folder Referenc, which contains Colorref, Pantone, and Samples folders. Colorref folder Cmyk_col, a folder which contains a PostScript file of CMYK mixtures you can download and print using the Fiery XJ Downloader or any other application that supports printing PostScript files;...
  • Page 46 If the Fiery XJ is connected to a MajestiK copier, select “Efxjx203.icm”. If the Fiery XJ is connected to a Regal copier, select “Efxjx303.icm”. If the Fiery XJ is connected to a 5750 copier, select “Efxjx503.icm”. Install the EFICOLOR files only if your system uses the EFICOLOR color management system.
  • Page 47 35 Copying files from the Clrfiles folder Loading the monitor settings file for Adobe Photoshop If you will be using Photoshop and Fiery XJ Scan, load the monitor settings file. You need to load this file only once. O LOAD THE MONITOR SETTINGS FILE 1.
  • Page 48 36 Copying files from the Clrfiles folder Loading the separation tables If you will be using Photoshop, install the EFICOLOR separation tables that correspond to your print device. O LOAD THE SEPARATION TABLES 1. Launch the Photoshop application. 2. Choose Preferences from the File menu. 3.

  • Page 49: Setting Up The Fiery Xj As A Postscript Printer

    37 Setting up the Fiery XJ as a PostScript printer Setting up the Fiery XJ as a PostScript printer To set up the Fiery XJ as a PostScript printer, you must install a PostScript Printer Driver and the PostScript Printer Description (PPD) file that corresponds to your printer.
  • Page 50 The Adobe PostScript Printers dialog box appears. 2. Select the Fiery XJ PPD that corresponds to your printer. For 5750 copiers, select Fiery XJ 5750 v2015.802. For MajestiK copiers, select Fiery XJ MajestiK v2015.802. For Regal copiers, select Fiery XJ Regal v2015.802.
  • Page 51 39 Setting up the Fiery XJ as a PostScript printer Selecting a printer port with Windows 3.1x When you install a printer, Windows assigns it to a default printer port. If the Fiery XJ is connected to your computer through a network or you want to assign it to a different port, you need to change the port assignment.
  • Page 52 40 Setting up the Fiery XJ as a PostScript printer Setting up IPX (Novell) printing with Windows 3.1x IPX (N O SET UP OVELL PRINTING FOR WINDOWS 1. In the Main group of the Windows Program Manager, double-click the Windows Setup icon.
  • Page 53 41 Setting up the Fiery XJ as a PostScript printer 7. Select Network. If you are printing to a file, select FILE. Printing to a file is useful if the printer is not at your site. However, if you select the FILE port, you cannot print to a printer until you select a network or printer port.

  • Page 54: Setting Up Printing With Windows 95

    42 Setting up the Fiery XJ as a PostScript printer You are ready to print to the Fiery XJ from Windows applications. When you select Print, jobs are routed to the print queue on the NetWare file server, and then transmitted to the Fiery XJ.
  • Page 55 8. Browse to the English\Prntdrv\W95_41 folder, and select the Fiery XJ PPD that corresponds to your printer; click Next. For 5750 copiers, select Fiery XJ 5750 v2015.802. For MajestiK copiers, select Fiery XJ MajestiK v2015.802. For Regal copiers, select Fiery XJ Regal v2015.802.
  • Page 56 44 Setting up the Fiery XJ as a PostScript printer 9. Select a port type (the default is LPT1:), and click Next. You’ll configure the port later, according to your network type. 10. Enter a descriptive name (up to 20 characters) for the printer. Select Yes to use the printer as the default printer, select No to test page and then click Next.
  • Page 57 45 Setting up the Fiery XJ as a PostScript printer Completing the Windows 95 connection To print from Windows 95 you need to: • Set up network servers, if any. • Set up the Fiery XJ to accept print jobs from your computer. •...
  • Page 58 46 Setting up the Fiery XJ as a PostScript printer 6. Click the General tab, and click Print Test Page. 7. Click OK in the window that appears. When you select Print from an application, your PostScript files are transmitted over the parallel port connection to the Print queue, using the printer driver and the Fiery XJ printer description file.
  • Page 59 47 Setting up the Fiery XJ as a PostScript printer 3. Double-click the IPX/SPX-compatible Protocol icon. 4. Click the Advanced tab. 5. In the Property list, click Frame Type. In the Value pop-up menu, select the Frame Type that corresponds to the one set during Fiery XJ Setup on the Control Panel. If necessary, print the Configuration page from the Control Panel to check the Frame Type.
  • Page 60 48 Setting up the Fiery XJ as a PostScript printer IPX (N O SET UP OVELL PRINTING WITH 1. Click the Start button, choose Settings, and then choose Printers. 2. Click the Fiery XJ icon, and choose Properties from the File menu (or right-click the icon and left-click Properties).

  • Page 61: Setting Up Printing From Windows Nt

    49 Setting up the Fiery XJ as a PostScript printer Setting up printing from Windows NT All the setups described here begin with installation of the Windows NT PostScript printer driver and the printer PPD, and finish by configuring a particular type of connection between the workstation and the Fiery XJ.
  • Page 62 50 Setting up the Fiery XJ as a PostScript printer Adding a printer to a local system requires that you log in to your local Windows NT workstation (not the network server domain) and that you are a member of the Administrators group for your workstation.
  • Page 63 51 Setting up the Fiery XJ as a PostScript printer 4. To install a printer locally, select My Computer, and click Next. The available system ports are displayed. 5. Check LPT1: and click Next. This is a general installation that works for the parallel port connection. You can add a network port later, according to your network type.
  • Page 64 52 Setting up the Fiery XJ as a PostScript printer The Install from Disk dialog box prompts you for the disk. 7. Type the name of the CD-ROM drive (for example, D:\) and click Browse. In the Locate File dialog box, browse to the English\Prntdrv\Win_nt4x folder and click Open. Make sure Ntprint.inf is selected and appears in the File name field.
  • Page 65 9. The Fiery XJ PPDs are displayed in the Printers list. Select the PPD file that corresponds to your printer and click Next. For 5750 copiers, select Fiery XJ 5750 v2015.802. For MajestiK copiers, select Fiery XJ MajestiK v2015.802. For Regal copiers, select Fiery XJ Regal v2015.802.
  • Page 66 54 Setting up the Fiery XJ as a PostScript printer O COMPLETE INSTALLATION OF THE PRINTER DRIVER If the Files Needed dialog box appears, it prompts you to locate the Windows NT PostScript driver PSCRIPT.DLL. 1. If this is the first PostScript printer on your system: •...
  • Page 67 55 Setting up the Fiery XJ as a PostScript printer 3. Right-click to select the Fiery XJ, and left-click Properties. 4. Complete the printer connection, according to your network type. • To configure the parallel connection, see “Completing the Windows NT 4.0 parallel port connection”...
  • Page 68 56 Setting up the Fiery XJ as a PostScript printer Completing the Windows NT 4.0 parallel port connection The parallel port cable connects the Fiery XJ to a single computer. Once you have installed the Windows NT PostScript printer driver and the Fiery XJ PPD, complete the setup for parallel port printing as follows: O SET UP PARALLEL PRINTING FOR 1.
  • Page 69 57 Setting up the Fiery XJ as a PostScript printer TCP/IP O PREPARE THE IERY 1. With the Fiery XJ turned off, connect it to the network. 2. Turn on the Fiery XJ and from the Control Panel, select PRINTER SETUP. Confirm that one of the queues is enabled.
  • Page 70 Fiery XJ instead of the IP address. 5. Press Tab and type the internal name of the Fiery XJ in lowercase letters. The name must be one of these: For 5750 copiers: print_5750, hold_5750. For MajestiK copiers: print_5760/65, hold_5760/65.
  • Page 71 59 Setting up the Fiery XJ as a PostScript printer 8. Click OK to close the Ports property sheet. The new port has been configured. You should now print a test page to verify the connection. 9. Open the Printer Properties dialog box for the Fiery XJ. Click General to display the General property sheet and click Print Test Page.
  • Page 72 60 Setting up the Fiery XJ as a PostScript printer 7. Select the Fiery XJ PPD that corresponds to your printer and click OK. For 5750 copiers, select Fiery XJ 5750 v2015.802. For MajestiK copiers, select Fiery XJ MajestiK v2015.802.
  • Page 73 61 Setting up the Fiery XJ as a PostScript printer 10. To accept the default settings, click OK in the PostScript Printer Setup dialog box. Even though the Fiery XJ does not use halftoning, do not deselect Use Printer Halftoning. The Fiery XJ now appears in its own Printer window in the Print Manager window.
  • Page 74 62 Setting up the Fiery XJ as a PostScript printer Completing the Windows NT 3.51 parallel connection The parallel port cable connects the Fiery XJ to a single computer. Once you have installed the Windows NT PostScript printer driver and the Fiery XJ PPD, complete the setup for parallel port printing as follows: O SET UP PARALLEL PRINTING FOR 1.
  • Page 75 You can print the Configuration page to check the IP address. 6. In the “Name of printer on that machine:” area, type the internal name of the Fiery XJ in lowercase letters. The name must be one of these: For 5750 copiers: print_5750, hold_5750. For MajestiK copiers: print_5760/65, hold_5760/65.

  • Page 76: Fiery Webtools

    65 Setting up Fiery WebTools Fiery WebTools allow you to remotely manage your Fiery XJ from the Internet or your Fiery WebTools company’s intranet. The Fiery XJ has its own home page, from which you are able to select from a variety of functions including Status, WebSpooler, WebLink, and Installer.

  • Page 77: Using The Webtools Installer

    66 Fiery WebTools O SET UP IERY OOLS ON EACH USER 1. Enable TCP/IP networking. 2. Make sure the workstation has a valid, unique IP address. 3. Make sure an Internet browser that supports the Java language and frames, such as Netscape Navigator v3.0 or Microsoft Internet Explorer v3.0, is installed.
  • Page 78 67 Using the WebTools Installer 3. Under the name of your operating system, click “utilities”. For Macintosh, a folder named “Installers” is downloaded to the desktop in a BinHex-encoded, compressed format. If your internet browser is equipped with an expander utility such as StuffIt Expander decompressed automatically.
  • Page 79 68 Fiery WebTools 3. Under the name of your operating system, click “ppd files”. For Macintosh, a folder named “Printer Driver” is downloaded to the desktop in a BinHex-encoded, compressed format. If your internet browser is equipped with an expander utility such as StuffIt Expander decompressed automatically.

  • Page 80: Using The Printer Driver Installer For Macintosh

    69 Using the Printer Driver Installer for Macintosh Using the Printer Driver Installer for Macintosh The Printer Driver for Macintosh cannot be installed to the same disk drive from which it is being installed; therefore, it is necessary to copy the Printer Driver files to a floppy disk in order to use them.
  • Page 81 70 Fiery WebTools 6. Copy the file “PSPrinter Install” to the floppy disk. The floppy disk’s file structure should appear as follows (if “by Name” is selected in the Finder’s View menu): For instructions on installing the Printer Driver for Macintosh, see “Setting up the Fiery XJ as a PostScript printer”...

  • Page 82: Troubleshooting

    If the Printer Driver cannot autoselect the printer description file, when prompted open the System Folder:Extensions:Printer Descriptions folder and select the file that corresponds to your copier. On a Windows computer Setting up IPX (Novell) printing for Windows NT Workstation •...
  • Page 83 71 Troubleshooting Problems with Fiery XJ Scan If you attempt to use the Fiery XJ Scan plug-in and receive the error message “Could not complete your request because of a program error”, reinstall the Fiery XJ utilities from the User Software CD. The necessary netlayer software is installed during installation of the utilities;...
  • Page 84 Index Adobe Photoshop x, 11, 12, 35 Adobe PostScript Printer Driver x Adobe PostScript printer driver Windows 71 Windows 3.1x 37 Windows 95 42 ADOBEPS.DRV see Adobe PostScript printer driver AppleTalk connecting to Macintosh 14 color management files Macintosh 10 Windows 33 ColorSync printer profiles installing Macintosh 7...
  • Page 85 73 Index selecting the PostScript Printer Description (PPD) 14 system requirements x Utilities Installer 1 monitor settings file Macintosh 11 Windows 35 moving files Windows 27 NetWare network port with Windows 3.1x 41 NetWare client setup Windows 3.1x 40 Windows 95 46, 48 NET_WSCK.INI file 26 configuring for IPX/SPX 28 configuring for TCP/IP 30...

This manual is also suitable for:

Docucolor 5799Regal 57905760

Table of Contents