Hitachi Zaxis 850LC-3 Operator's Manual page 75

Selecting an Attachment from Main Menu
1. When the basic screen displays, push the menu key and
display main menu.
2. Select work mode from main menu by using keys 1 and
2. Push determination key. Then, the work mode screen
displays.
3. Push the key located under an attachment mark to be
used in order to select the attachment.
(In the right example, Breaker 1 is selected.)
NOTE: When selecting Digging, return to Main Menu.
4. On the attachment specification screen, confirm if speci-
fication of the installed attachment agrees with that dis-
played on the screen.
NOTE: When pushing the back key, return to the basic screen.
5. Push the determination key, and the basic screen dis-
plays.
OPERATOR'S STATION
Key 1
Digging
Select Breaker 1
1-23
Basic Screen
Key 2 Determination Key
Work Mode Screen
Breaker 1
Maximum Pump Flow Rate 260
L/min
Maximum Engine Speed 1700
min
Valve Selector Accumulator
2-Speed Selector
OFF 2ndary Hydraulic Relief Selector
1 2 3 4 5
6 7 8 9 0
F1 F2 F3 F4
Attachment Specification Screen
Menu Key
M1J1-01-002
Back Key
M1J5-05-002
Back Key
T1J7-02-01-002E
-1
Determination
key
T1JB-05-02-002E