Equipment Of Head Guard, Rops, Fops; Provide Signals For Jobs Involving Multiple Numbers Of Machines; Confirm Direction Of Machine To Be Driven - Hitachi Zaxis 850LC-3 Operator's Manual

EQUIPMENT OF HEAD GUARD, ROPS, FOPS

In case the machine is operated in areas where the possibility
of falling stones or debris exist, equip a head guard, ROPS, or
FOPS according to the potential hazardous conditions. (The
standard cab for this machine corresponds to ROPS and FOPS.)
ROPS: Roll-Over Protective Structure
FOPS: Falling Object Protective Structure
PROVIDE SIGNALS FOR JOBS INVOLVING MUL-
TIPLE NUMBERS OF MACHINES
• For jobs involving multiple numbers of machines, provide
signals commonly known by all personnel involved. Also,
appoint a signal person to coordinate the job site. Make
sure that all personnel obey the signal person's directions.

CONFIRM DIRECTION OF MACHINE TO BE DRIVEN

• Incorrect travel pedal/lever operation may result in serious
injury death.
• Before driving the machine, confirm the position of the
undercarriage in relation to the operator's position. If the
travel motors are located in front of the cab, the machine
will move in reverse when travel pedals/levers are oper-
ated to the front.
SAFETY
018-E01A-0481
017-E01A-0491
S-10
SA-490
SA-481
SA-491