Hitachi Zaxis 850LC-3 Operator's Manual page 121

• Temperature Control Switch (9)
Sets the air temperature in the range of 18 to 32.0 °C (65 to
90 °F) in the MANUAL and AUTO modes. Temperature can
be set by 0.5 °C (0.9 °F) increments. The set-temperature is
displayed on the LCD (8) center.
• Increasing Temperature
Each time the top side mark " " on temperature control
switch (9) is pressed, the set-temperature is increased by
0.5 °C (0.9 °F) increments.
• Decreasing Temperature
Each time the bottom side mark " " on temperature con-
trol switch (9) is pressed, the set-temperature is decreased
by 0.5 °C (0.9 °F) increments.
• Temperature Control Switch
• Temperature Mode Change (Centigrade ↔ Fahrenheit)
Press both " " and " " marks on the temperature control
switch for longer than 5 seconds at the same time to
change the temperature mode (Centigrade ↔ Fahren-
heit). (Unit in temperature mode is abbreviated.)
Temperature Mode
Centigrade
Fahrenheit
OPERATOR'S STATION
Display on LCD
18.0 to 32.0
63 to 91
1-69
8 9
M178-01-017