Hitachi Zaxis 850LC-3 Operator's Manual page 198

4. Stop the engine. Remove the key from the key switch.
5. Move the control levers several times until hydraulic pres-
sure in the cylinders is released.
6. Pull the pilot control shut-off lever to the LOCK position.
7. Close cab windows, roof vent and door, and cover the ex-
haust opening, to prevent entry of wind and water.
NOTE: In cold weather, be sure to warm up the machine be-
fore loading or unloading it.
Transporting
WARNING: Fasten chains or cables to the machine
frame. Do not place chains or cables over or against
the hydraulic lines or hoses.
1. Place blocks in front of and behind the tracks.
2. Fasten each corner of the machine and front attachment
to the trailer with a chain or cable.
TRANSPORTING
6-18
M1V1-06-001